Suction Molding - Articles - Scientific Research Publishing

Dependence of Lower Molding Temperature Limit and Molding Time on Molding Mechanism in Dental Thermoforming (Articles)

Mutsumi Takahashi, Masatoshi Takeuchi

Materials Sciences and Applications Vol.15 No.9, September 18, 2024

DOI: 10.4236/msa.2024.159024 138 Downloads 536 Views Citations
Comparison of the Effectiveness of Marked Suction Tubes vs. Plain Suction Tubes in Pediatric Mechanically Ventilated Patients (Articles)

Kexin Yang, Yang Zhang, Menghui Duan, Qiuju Liang, Jianfei Zhang, Ping Kong, Mengqi Duan, Xiangwei Chen

Open Journal of Pediatrics Vol.13 No.6, November 3, 2023

DOI: 10.4236/ojped.2023.136085 252 Downloads 1,201 Views Citations
Processed Low NO_x Fly Ash as a Filler in Plastics (Articles)

X. Huang, J.Y. Hwang, J.M. Gillis

Journal of Minerals and Materials Characterization and Engineering Vol.2 No.1, June 12, 2003

DOI: 10.4236/jmmce.2003.21002 7,782 Downloads 10,649 Views Citations
Research Progress of the Modification in Sulfur Concrete (Articles)

Xuemin You

Materials Sciences and Applications Vol.12 No.7, July 16, 2021

DOI: 10.4236/msa.2021.127024 779 Downloads 3,001 Views Citations
Effect of Thermal Shrinkage of Extruded Sheet on Mouthguard Thickness: Influence of Model Undercut (Articles)

Mutsumi Takahashi, Yogetsu Bando

Materials Sciences and Applications Vol.13 No.1, January 29, 2022

DOI: 10.4236/msa.2022.131004 310 Downloads 1,186 Views Citations
Effect of Molding Technique That Move Model Position Just before Formation in Production of Laminated Mouthguard (Articles)

Mutsumi Takahashi, Yogetsu Bando

Materials Sciences and Applications Vol.14 No.6, June 15, 2023

DOI: 10.4236/msa.2023.146020 250 Downloads 904 Views Citations
Fabrication and Mechanical Characterization of VARTM Epoxy Composites (Articles)

Abdallah Sulaiman Altobi, Yousuf Pasha Shaik

Open Access Library Journal Vol.13 No.4, April 24, 2026

DOI: 10.4236/oalib.1115157 12 Downloads 143 Views Citations
Withdraw: Improvement on Adhesion Properties of Insert Injection Molding Composites: Effect of Inserted Parts, Adhesive Lengths and Injection Conditions (Articles)

Badin Pinpathomrat, Hiroyuki Hamada

Open Journal of Composite Materials Vol.7 No.4, July 27, 2017

DOI: 10.4236/ojcm.2017.74013 1,477 Downloads 3,162 Views Citations
This article belongs to the Special Issue on Composite Interface and Damages
The Comparison of the Mechanical Characteristics of ABS Using Three Different Plastic Production Techniques (Articles)

Yousuf Pasha Shaik, Naresh Kumar Naidu, Venkat Reddy Yadavalli, Manish Reddy Muthyala

Open Access Library Journal Vol.10 No.5, May 24, 2023

DOI: 10.4236/oalib.1110097 490 Downloads 7,496 Views Citations
Solution of MHD Flow past a Vertical Porous Plate through a Porous Medium under Oscillatory Suction (Articles)

Ashraf A. Moniem, W. S. Hassanin

Applied Mathematics Vol.4 No.4, April 30, 2013

DOI: 10.4236/am.2013.44096 4,607 Downloads 8,000 Views Citations
Analytic Solution of MHD Stagnation Point Flow over a Stretching Permeable Surface with Effects of Viscous Dissipation and Joule Heating (Articles)

Satyaban Panigrahi, Motahar Reza

Engineering Vol.6 No.12, November 24, 2014

DOI: 10.4236/eng.2014.612077 3,586 Downloads 5,000 Views Citations
Pressure Characteristics Study for the Configuration of Sudden Expansion with Central Restriction and Suction (Articles)

Tridibesh Das, Somnath Chakrabarti

Open Journal of Fluid Dynamics Vol.6 No.1, March 17, 2016

DOI: 10.4236/ojfd.2016.61003 3,073 Downloads 4,596 Views Citations
Radiative Effect on Flow and Heat Transfer over a Vertically Oscillating Porous Flat Plate Embedded in Porous Medium with Oscillating Surface Temperature (Articles)

Monika Miglani, Net Ram Garg, Mukesh Kumar Sharma

Open Journal of Fluid Dynamics Vol.6 No.2, June 27, 2016

DOI: 10.4236/ojfd.2016.62010 2,571 Downloads 4,117 Views Citations
Changes in Total Dissolved Solids Concentration during Infiltration through Soils (Rain, Fresh Groundwater and Treated Wastewater) (Articles)

Alsharifa Hind Mohammad, Ghaidaa Abdullat, Khitam Alzughoul

Journal of Environmental Protection Vol.8 No.1, January 16, 2017

DOI: 10.4236/jep.2017.81004 1,617 Downloads 5,125 Views Citations
Angle Effect to Dropping of Dew in Closed Suction Catheters (Articles)

Kazuto Doi, Mayumi Doi, Yukoh Yaegashi, Katsuhisa Imoto, Masaru Ando, Junichi Kadota

Health Vol.10 No.6, June 5, 2018

DOI: 10.4236/health.2018.106055 1,489 Downloads 3,961 Views Citations
Fetal Instrumental Extractions at the Maternity Section of the Dakar Nabil Choucair Health Centre (Senegal) in 2017: Epidemio-Clinical Aspects, Indications and Prognosis (Articles)

Omar Gassama, Babacar Biaye, Boura Taoufiki, Ndeye Astou Faye, Djibril Diallo, Aminata Niass, Abdou Ndiaye, Alassane Diouf, Jean Charles Moreau

Open Journal of Obstetrics and Gynecology Vol.10 No.3, March 26, 2020

DOI: 10.4236/ojog.2020.1030035 615 Downloads 1,646 Views Citations
Comparison of the Use of Conventional and Antibiotic-Coated Tracheal Tubes and EVAC on the Incidence of Ventilator-Associated Pneumonia (VAP) (Articles)

Mehrdad Taghizadeh, Amin Shams Akhtari, Babak Heidariaghdam, Seyedeh Hedieh Mousavipak, Siamak Moghadamzadeh, Mohammad Reza Haji Esmaili, Faeze Vahid

Open Journal of Emergency Medicine Vol.11 No.3, September 11, 2023

DOI: 10.4236/ojem.2023.113006 266 Downloads 1,084 Views Citations
Combined Litho- and Cement Stabilization of Earth Bricks: Experimental Study of Compressive Strength (Articles)

Mouctar Mahamat Zakaria, Bozabe Renonet Karka, Amir Moungache, Mahamat Barka, Yacoub Idriss Halawlaw

Open Journal of Applied Sciences Vol.15 No.8, August 19, 2025

DOI: 10.4236/ojapps.2025.158157 82 Downloads 483 Views Citations
Mg/Al complex oxides-A new type of solid basic catalyst for epoxidation (Articles)

Heng Miao, Shi-Chao Xu, Hai-Nan Wang, Wen-Xia Qin, Lin Lin Zhang, Ji-Mei Zhang, Juan Yang, Zhao Dai, Guo Zheng, En-Qi Tang

Journal of Biomedical Science and Engineering Vol.3 No.2, March 1, 2010

DOI: 10.4236/jbise.2010.32028 5,197 Downloads 10,111 Views Citations
Production and Properties of Short Jute and Short E-Glass Fiber Reinforced Polypropylene-Based Composites (Articles)

Md Nuruzzaman Khan, Juganta K. Roy, Nousin Akter, Haydar U. Zaman, Tuhidul Islam, Ruhul A. Khan

Open Journal of Composite Materials Vol.2 No.2, April 26, 2012

DOI: 10.4236/ojcm.2012.22006 9,571 Downloads 20,426 Views Citations

First <12 3 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies