Simulation; Visualization; Micromilling; Tool Wear - Articles

Simulation-Based Analysis and Intuitive Visualization of the Cutting Edge Load in Micromilling of Hardened Steel (Articles)

Petra Kersting, Dirk Biermann, Eugen Krebs

Engineering Vol.4 No.9, September 28, 2012

DOI: 10.4236/eng.2012.49068 5,306 Downloads 7,892 Views Citations
An Automatic Cross-System File Generation System for Biological Network Visualization Tools (Articles)

Tianhan Zhang, Xun Lu

Applied Mathematics Vol.5 No.19, November 12, 2014

DOI: 10.4236/am.2014.519296 3,724 Downloads 4,803 Views Citations
This article belongs to the Special Issue on Mathematical Biology
Influence of Deep Cryogenic Treatment (DCT) on Thermo Mechanical Performance of AISI H13 Tool Steel (Articles)

Valmik Bhawar, Shreyans Khot, Prakash Kattire, Mohan Mehta, Rajkumar Singh

Journal of Materials Science and Chemical Engineering Vol.5 No.1, January 16, 2017

DOI: 10.4236/msce.2017.51013 4,224 Downloads 6,552 Views Citations
Analysis of the Tool Condition Monitoring System Using Fuzzy Logic and Signal Processing (Articles)

Chidambaram Ramesh Kannan, Palani Padmanabhan

Circuits and Systems Vol.7 No.9, July 28, 2016

DOI: 10.4236/cs.2016.79232 1,778 Downloads 3,108 Views Citations
Prediction of Wearing of Cutting Tools Using Real Time Machining Parameters and Temperature Using Rayleigh-Ham Method (Articles)

Jean Nyatte Nyatte, Fabrice Alban Epee, Wilba Christophe Kikmo, Samuel Batambock, Claude Valéry Ngayihi Abbe, Robert Nzengwa

Modern Mechanical Engineering Vol.13 No.2, May 31, 2023

DOI: 10.4236/mme.2023.132003 323 Downloads 1,113 Views Citations
Tool Wear Classification Using Fuzzy Logic for Machining of Al/SiC Composite Material (Articles)

V. Kalaichelvi, R. Karthikeyan, D. Sivakumar, V. Srinivasan

Modeling and Numerical Simulation of Material Science Vol.2 No.2, April 16, 2012

DOI: 10.4236/mnsms.2012.22003 5,987 Downloads 13,492 Views Citations
Analysis of Tool Wear Rate in Drilling Operation using Scanning Electron Microscope (SEM) (Articles)

Anil Jindal

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.1, January 20, 2012

DOI: 10.4236/jmmce.2012.111004 10,249 Downloads 13,370 Views Citations
Effect of Machining Parameters on Tool Wear and Nodal Temperature in Hard Turning of AISI D3 Steel (Articles)

Varaprasad Bhemuni, Srinivasa Rao Chelamalasetti, Siva Prasad Kondapalli

Open Access Library Journal Vol.1 No.6, September 16, 2014

DOI: 10.4236/oalib.1100627 1,562 Downloads 2,816 Views Citations
Experimentation on Tool Wear and Surface Roughness in AISI D2 Steel Turning with WC Insert (Articles)

N. López-Luiz, O. Jiménez Alemán, F. Alvarado Hernández, M. Montoya Dávila, V. H. Baltazar-Hernández

Modern Mechanical Engineering Vol.8 No.3, August 29, 2018

DOI: 10.4236/mme.2018.83014 1,473 Downloads 3,888 Views Citations
Urban Simulation Models: Contributions as Analysis-Methodology in a Project of Urban Renewal* (Articles)

María Cecilia Marengo

Current Urban Studies Vol.2 No.3, September 29, 2014

DOI: 10.4236/cus.2014.23028 6,532 Downloads 8,803 Views Citations
Influence of Coolant in Machinability of Titanium Alloy (Ti-6Al-4V) (Articles)

Muthukrishnan Namb, Davim Paulo

Journal of Surface Engineered Materials and Advanced Technology Vol.1 No.1, March 17, 2011

DOI: 10.4236/jsemat.2011.11002 11,158 Downloads 23,600 Views Citations
Online Capacitance Modeling Tool for Conductors Represented as Simply-Connected Polygonal Geometries in 2D (Articles)

Fengyuan Li, Jason V. Clark

Journal of Sensor Technology Vol.2 No.3, September 26, 2012

DOI: 10.4236/jst.2012.23022 7,365 Downloads 11,254 Views Citations
A Computational Solution of Natural Convection Flow in a Rotating Fluid with Radiative Heat Transfer (Articles)

Harouna Naroua

American Journal of Computational Mathematics Vol.6 No.2, June 13, 2016

DOI: 10.4236/ajcm.2016.62012 2,032 Downloads 3,327 Views Citations
Tool Temperature and Process Modeling of Friction Stir Welding (Articles)

Takashi Nakamura, Toshiyuki Obikawa, Eitaro Yukutake, Satoru Ueda, Itaru Nishizaki

Modern Mechanical Engineering Vol.8 No.1, February 28, 2018

DOI: 10.4236/mme.2018.81006 1,822 Downloads 5,347 Views Citations
This article belongs to the Special Issue on Friction Stir Welding
Simulation Analysis of Surface Roughness for Milling Process (Articles)

Bai Liu, Jixuan Yuan, Zhenjiu Zhang

Natural Science Vol.11 No.5, May 9, 2019

DOI: 10.4236/ns.2019.115014 1,174 Downloads 2,912 Views Citations
Research on Wheel Rail Wear for a 140 t Open Type Hot Metal Car (Articles)

Bo Feng, Sumei Jia, Guosheng Feng

Engineering Vol.12 No.8, August 19, 2020

DOI: 10.4236/eng.2020.128039 616 Downloads 1,836 Views Citations
Distributed Generation Islanding Effect on Distribution Networks and End User Loads Using the Master-Slave Islanding Method (Articles)

Lambros Ekonomou, George P. Fotis, Vasiliki Vita, Valeri Mladenov

Journal of Power and Energy Engineering Vol.4 No.10, October 25, 2016

DOI: 10.4236/jpee.2016.410001 2,094 Downloads 4,788 Views Citations
A Generic Computational Solution of a Natural Convection Flow past an Infinite Vertical Porous Plate (Articles)

Harouna Naroua, Moussa Idi Bachir

American Journal of Computational Mathematics Vol.6 No.4, November 11, 2016

DOI: 10.4236/ajcm.2016.64030 1,558 Downloads 2,638 Views Citations
The New RN and Emergency Patient Care Scenarios: How Simulation Can Help (Articles)

Donna Driscoll

Open Access Library Journal Vol.5 No.1, January 5, 2018

DOI: 10.4236/oalib.1103904 1,472 Downloads 5,455 Views Citations
An Exploratory Study of Experimental Tools for Wireless Sensor Networks (Articles)

A.K. Dwivedi, O.P. Vyas

Wireless Sensor Network Vol.3 No.7, July 28, 2011

DOI: 10.4236/wsn.2011.37025 13,347 Downloads 30,329 Views Citations

First <12 3 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies