NC Machining - Articles - Scientific Research Publishing

The Extremely Efficient New Model in Milling of Complicated Surfaces in 5-Axis Machining for 3-Dimensional Contact (Articles)

Yi Lou, Huran Liu, Bo Tan

World Journal of Engineering and Technology Vol.6 No.3, July 31, 2018

DOI: 10.4236/wjet.2018.63038 1,004 Downloads 1,802 Views Citations
This article belongs to the Special Issue on Machine Tool and Manufacturing
The Charge Storage of Doubly Stacked Nanocrystalline-Si based Metal Insulator Semiconductor Memory Structure (Articles)

Xiang Wang, Chao Song, Yanqing Guo, Jie Song, Rui Huang

Modeling and Numerical Simulation of Material Science Vol.3 No.1B, January 21, 2013

DOI: 10.4236/mnsms.2013.31B006 3,907 Downloads 6,009 Views Citations
NC-Rings and Some Commutativity Conditions (Articles)

S. Khalid Nauman, Najat M. Muthana

Advances in Pure Mathematics Vol.9 No.2, February 28, 2019

DOI: 10.4236/apm.2019.92008 1,063 Downloads 2,853 Views Citations
Development Trend of NC Machining Accuracy Control Technology for Aeronautical Structural Parts (Articles)

Qingchun Xiong, Qinghua Zhou

World Journal of Engineering and Technology Vol.8 No.3, July 17, 2020

DOI: 10.4236/wjet.2020.83022 981 Downloads 2,672 Views Citations
Taguchi Full Factorial Design of Experiments Optimisation of Cutting Parameters for Energy Efficiency and Surface Roughness during the Dry Turning of EN19 Material (Articles)

Nicholas Tayisepi, Albert Nkulumo Mnkandla, Godfrey Tigere, Oscar Gwatidzo, Winnie Mutenhabundo, Emmanuel Ndala, Lovelace Makakatanwa Wagoneka

World Journal of Engineering and Technology Vol.12 No.2, May 30, 2024

DOI: 10.4236/wjet.2024.122028 274 Downloads 1,228 Views Citations
This article belongs to the Special Issue on Modern Manufacturing Technology
AC Impedance Spectroscopy of a-nc-Si:H Thin Films (Articles)

Vladimir Tudić

Engineering Vol.6 No.8, July 11, 2014

DOI: 10.4236/eng.2014.68047 5,048 Downloads 6,882 Views Citations
The P40 Cutting Tool Wear Modelization Machining Fk20MnCr5 (Articles)

Idriss Amara, Embarek Ferkous, Fayçal Bentaleb, Razika Aouad

Engineering Vol.3 No.9, September 23, 2011

DOI: 10.4236/eng.2011.39114 5,471 Downloads 9,741 Views Citations
Synthesis and Characterization of Ultrafine Grained 304 Stainless Steel through Machining (Articles)

V. Senthilkumar, K. Lenin

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.5, April 20, 2011

DOI: 10.4236/jmmce.2011.105034 6,653 Downloads 8,303 Views Citations
Forgeability and Machinability of Stir Cast Aluminum Alloy Metal Matrix Composites (Articles)

Rabindra Behera, S. Das, D. Chatterjee, G. Sutradhar

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.10, August 10, 2011

DOI: 10.4236/jmmce.2011.1010072 8,415 Downloads 12,484 Views Citations
Application and Analysis of Force Control Strategies to Deburring and Grinding (Articles)

Frank Domroes, Carsten Krewet, Bernd Kuhlenkoetter

Modern Mechanical Engineering Vol.3 No.2A, June 21, 2013

DOI: 10.4236/mme.2013.32A002 6,503 Downloads 10,985 Views Citations
This article belongs to the Special Issue on Machinery Manufacturing and Its Automation
Research on the Deformation of Turbine Blades at Machining (Articles)

Masu Yamada, Keiji Sonoya, Takahito Sobayashi, Hiroshi Satoh

Energy and Power Engineering Vol.8 No.1, January 29, 2016

DOI: 10.4236/epe.2016.81001 5,496 Downloads 6,940 Views Citations
Fixture Design to Supplement Machining and Fuel Cell Education (Articles)

Yeong Ryu, Hazem Tawfik

Engineering Vol.9 No.5, May 27, 2017

DOI: 10.4236/eng.2017.95022 1,911 Downloads 3,303 Views Citations
Error Prediction in Industrial Robot Machining: Optimization Based on Stiffness and Accuracy Limit (Articles)

Yair Shneor, Vladimir Chapsky

Engineering Vol.13 No.6, June 30, 2021

DOI: 10.4236/eng.2021.136024 898 Downloads 2,275 Views Citations
Prediction of Wearing of Cutting Tools Using Real Time Machining Parameters and Temperature Using Rayleigh-Ham Method (Articles)

Jean Nyatte Nyatte, Fabrice Alban Epee, Wilba Christophe Kikmo, Samuel Batambock, Claude Valéry Ngayihi Abbe, Robert Nzengwa

Modern Mechanical Engineering Vol.13 No.2, May 31, 2023

DOI: 10.4236/mme.2023.132003 323 Downloads 1,113 Views Citations
Grey Relational Optimization of Turning Parameters in Dry Machining of Austenitic Stainless Steel Using Zr Based Coated Tools (Articles)

Kaushik Vijaya Prasad, Kishore Triambak Kashyap, Madapat Job Richard, Posina Gerard Prabhu Rao, Abhishek Rajole, Rabara Hiren

Open Journal of Applied Sciences Vol.7 No.7, July 14, 2017

DOI: 10.4236/ojapps.2017.77027 1,252 Downloads 2,576 Views Citations
Influence of Laser-Induced Bubble Formation on Laser Chemical Machining (Articles)

Marcel Simons, Tim Radel, Raj Shanta Kajsaravally, Frank Vollertsen

Journal of Surface Engineered Materials and Advanced Technology Vol.10 No.2, March 20, 2020

DOI: 10.4236/jsemat.2020.102002 719 Downloads 1,919 Views Citations
Process Window Expansion of Laser Chemical Machining by Using High Pressure (Articles)

Marcel Simons, Tim Radel, Frank Vollertsen

Materials Sciences and Applications Vol.11 No.5, May 8, 2020

DOI: 10.4236/msa.2020.115020 515 Downloads 1,402 Views Citations
Noncommutative Phase Space and the Two Dimensional Quantum Dipole in Background Electric and Magnetic Fields (Articles)

Anselme F. Dossa, Gabriel Y. H. Avossevou

Journal of Modern Physics Vol.4 No.10, October 31, 2013

DOI: 10.4236/jmp.2013.410168 3,895 Downloads 6,135 Views Citations
Topical Application of Cudrania tricuspidata Stem Extract Inhibits Atopic Dermatitis-Like Skin Lesions in an NC/Nga Mouse Model: An Experimental Animal Study (Articles)

Yoo-Sin Park, Shin-Hee Kim, Sang-Yeon Kim, Gae-Myoung Koh, Ju-Hwan Suh, Ju-Seop Kang

Pharmacology & Pharmacy Vol.7 No.8, August 31, 2016

DOI: 10.4236/pp.2016.78044 2,070 Downloads 3,883 Views Citations
This article belongs to the Special Issue on Drug Effects & Novel Drug Development
Influence of Nanocrystalline Structure on Wear and Corrosion Behavior of Al-SiC_P Composite (Articles)

Jagannati Venumurali, Gaddam Bhanodaya Reddy

Journal of Minerals and Materials Characterization and Engineering Vol.8 No.2, March 25, 2020

DOI: 10.4236/jmmce.2020.82004 645 Downloads 1,580 Views Citations

First <12 3 >Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies