Molding Technique - Articles - Scientific Research Publishing

Effect of Molding Technique That Move Model Position Just before Formation in Production of Laminated Mouthguard (Articles)

Mutsumi Takahashi, Yogetsu Bando

Materials Sciences and Applications Vol.14 No.6, June 15, 2023

DOI: 10.4236/msa.2023.146020 225 Downloads 861 Views Citations
Dependence of Lower Molding Temperature Limit and Molding Time on Molding Mechanism in Dental Thermoforming (Articles)

Mutsumi Takahashi, Masatoshi Takeuchi

Materials Sciences and Applications Vol.15 No.9, September 18, 2024

DOI: 10.4236/msa.2024.159024 98 Downloads 462 Views Citations
Processed Low NO_x Fly Ash as a Filler in Plastics (Articles)

X. Huang, J.Y. Hwang, J.M. Gillis

Journal of Minerals and Materials Characterization and Engineering Vol.2 No.1, June 12, 2003

DOI: 10.4236/jmmce.2003.21002 7,727 Downloads 10,566 Views Citations
Research Progress of the Modification in Sulfur Concrete (Articles)

Xuemin You

Materials Sciences and Applications Vol.12 No.7, July 16, 2021

DOI: 10.4236/msa.2021.127024 739 Downloads 2,911 Views Citations
Effect of Thermal Shrinkage of Extruded Sheet on Mouthguard Thickness: Influence of Model Undercut (Articles)

Mutsumi Takahashi, Yogetsu Bando

Materials Sciences and Applications Vol.13 No.1, January 29, 2022

DOI: 10.4236/msa.2022.131004 284 Downloads 1,132 Views Citations
Fabrication and Mechanical Characterization of VARTM Epoxy Composites (Articles)

Abdallah Sulaiman Altobi, Yousuf Pasha Shaik

Open Access Library Journal Vol.13 No.4, April 24, 2026

DOI: 10.4236/oalib.1115157 9 Downloads 96 Views Citations
Withdraw: Improvement on Adhesion Properties of Insert Injection Molding Composites: Effect of Inserted Parts, Adhesive Lengths and Injection Conditions (Articles)

Badin Pinpathomrat, Hiroyuki Hamada

Open Journal of Composite Materials Vol.7 No.4, July 27, 2017

DOI: 10.4236/ojcm.2017.74013 1,434 Downloads 3,102 Views Citations
This article belongs to the Special Issue on Composite Interface and Damages
The Comparison of the Mechanical Characteristics of ABS Using Three Different Plastic Production Techniques (Articles)

Yousuf Pasha Shaik, Naresh Kumar Naidu, Venkat Reddy Yadavalli, Manish Reddy Muthyala

Open Access Library Journal Vol.10 No.5, May 24, 2023

DOI: 10.4236/oalib.1110097 475 Downloads 7,376 Views Citations
Epidural Space Identification Using Continuous Real-Time Pressure Sensing Technology (CompuFlo^®): A Report of 600 Consecutive Cases (Articles)

Guillermo Hidalgo

Open Journal of Anesthesiology Vol.9 No.10, October 31, 2019

DOI: 10.4236/ojanes.2019.910018 820 Downloads 2,472 Views Citations
Mg/Al complex oxides-A new type of solid basic catalyst for epoxidation (Articles)

Heng Miao, Shi-Chao Xu, Hai-Nan Wang, Wen-Xia Qin, Lin Lin Zhang, Ji-Mei Zhang, Juan Yang, Zhao Dai, Guo Zheng, En-Qi Tang

Journal of Biomedical Science and Engineering Vol.3 No.2, March 1, 2010

DOI: 10.4236/jbise.2010.32028 5,172 Downloads 10,048 Views Citations
Production and Properties of Short Jute and Short E-Glass Fiber Reinforced Polypropylene-Based Composites (Articles)

Md Nuruzzaman Khan, Juganta K. Roy, Nousin Akter, Haydar U. Zaman, Tuhidul Islam, Ruhul A. Khan

Open Journal of Composite Materials Vol.2 No.2, April 26, 2012

DOI: 10.4236/ojcm.2012.22006 9,518 Downloads 20,302 Views Citations
Modification and Development of a Blow Molding Machine (Articles)

Bassam A. Al-Helou

Engineering Vol.4 No.4, April 26, 2012

DOI: 10.4236/eng.2012.44025 7,784 Downloads 12,533 Views Citations
Simulation and Injection Molding of Ring-Shaped Polymer Bonded Nickel Braze Metal Composite Preforms Based on Rheological and Thermal Analyses (Articles)

Stefan Kirchberg

Open Journal of Composite Materials Vol.3 No.2, April 15, 2013

DOI: 10.4236/ojcm.2013.32004 5,975 Downloads 9,898 Views Citations
Reducing Refractive Index Variations in Compression Molded Lenses by Annealing (Articles)

Bo Tao, Lianguan Shen, Allen Yi, Mujun Li, Jian Zhou

Optics and Photonics Journal Vol.3 No.2B, July 18, 2013

DOI: 10.4236/opj.2013.32B029 5,202 Downloads 7,555 Views Citations
Chemical Modification on Woven Jute and Nonwoven Wet-Laid Glass Fiber Sheet Reinforced Poly-(ε-Caprolactone) Composites (Articles)

Mohammad Muzammel Hossen, Mohammad Obaidur Rahman

Open Journal of Composite Materials Vol.11 No.4, September 1, 2021

DOI: 10.4236/ojcm.2021.114006 481 Downloads 2,371 Views Citations
Development of EVA Foam Using Corn Pith as a Sustainable Filler (Articles)

Ranadheer Malyala, Jens Schuster, Rahul Kovuru, Shameem Akthar Shaik

Open Journal of Composite Materials Vol.15 No.4, October 9, 2025

DOI: 10.4236/ojcm.2025.154011 53 Downloads 590 Views Citations
A Simple Test of Seminal Fluid Chemistry and Its Potential Impact on Cryopreservation (Articles)

Glenn Yeomans, Lindsay Penrose, Sam Prien

Open Journal of Veterinary Medicine Vol.13 No.9, September 14, 2023

DOI: 10.4236/ojvm.2023.139014 214 Downloads 817 Views Citations
Glandular Epispadias Repair: A Case Report (Articles)

Armel Quentin Essomba, Frantz Epoupa Ngalle, Philip Fernandez Owon’Abessolo, Bright Awondo-Che, Achille Aurele Mbassi, Axel Stephane Nwaha Makon, Pierre Joseph Fouda

Open Journal of Urology Vol.15 No.4, April 28, 2025

DOI: 10.4236/oju.2025.154015 91 Downloads 637 Views Citations
Experimental Characterization by Fluorescence of Capillary Flows in the Fiber Tows of Engineering Fabrics (Articles)

François LeBel, Amir Ershad Fanaei, Édu Ruiz, François Trochu

Open Journal of Inorganic Non-metallic Materials Vol.2 No.3, July 19, 2012

DOI: 10.4236/ojinm.2012.23004 6,962 Downloads 14,792 Views Citations
Effect of Molecular Weight and Molecular Distribution on Skin Structure and Shear Strength Distribution near the Surface of Thin-Wall Injection Molded Polypropylene (Articles)

Keisuke Maeda, Koji Yamada, Kazushi Yamada, Masaya Kotaki, Hiroyuki Nishimura

Open Journal of Organic Polymer Materials Vol.6 No.1, January 7, 2016

DOI: 10.4236/ojopm.2016.61001 4,429 Downloads 6,115 Views Citations

First <12 3 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies