Machining Accuracy - Articles - Scientific Research Publishing

Development Trend of NC Machining Accuracy Control Technology for Aeronautical Structural Parts (Articles)

Qingchun Xiong, Qinghua Zhou

World Journal of Engineering and Technology Vol.8 No.3, July 17, 2020

DOI: 10.4236/wjet.2020.83022 1,021 Downloads 2,755 Views Citations
Error Prediction in Industrial Robot Machining: Optimization Based on Stiffness and Accuracy Limit (Articles)

Yair Shneor, Vladimir Chapsky

Engineering Vol.13 No.6, June 30, 2021

DOI: 10.4236/eng.2021.136024 1,021 Downloads 2,449 Views Citations
Simulation Analysis of Surface Roughness for Milling Process (Articles)

Bai Liu, Jixuan Yuan, Zhenjiu Zhang

Natural Science Vol.11 No.5, May 9, 2019

DOI: 10.4236/ns.2019.115014 1,201 Downloads 2,992 Views Citations
Performance Improvement of the LM Device and Its Application to Precise Measurement of Motion Trajectories within a Small Range with a Machining Centre (Articles)

Hua Qiu, Yong Yue, Akio Kubo, Chao Lin, Kai Cheng, Dehong Huo, Dayou Li

Modern Mechanical Engineering Vol.2 No.3, August 31, 2012

DOI: 10.4236/mme.2012.23010 4,547 Downloads 8,173 Views Citations
The Extremely Efficient New Model in Milling of Complicated Surfaces in 5-Axis Machining for 3-Dimensional Contact (Articles)

Yi Lou, Huran Liu, Bo Tan

World Journal of Engineering and Technology Vol.6 No.3, July 31, 2018

DOI: 10.4236/wjet.2018.63038 1,045 Downloads 1,868 Views Citations
This article belongs to the Special Issue on Machine Tool and Manufacturing
Taguchi Full Factorial Design of Experiments Optimisation of Cutting Parameters for Energy Efficiency and Surface Roughness during the Dry Turning of EN19 Material (Articles)

Nicholas Tayisepi, Albert Nkulumo Mnkandla, Godfrey Tigere, Oscar Gwatidzo, Winnie Mutenhabundo, Emmanuel Ndala, Lovelace Makakatanwa Wagoneka

World Journal of Engineering and Technology Vol.12 No.2, May 30, 2024

DOI: 10.4236/wjet.2024.122028 319 Downloads 1,313 Views Citations
This article belongs to the Special Issue on Modern Manufacturing Technology
The P40 Cutting Tool Wear Modelization Machining Fk20MnCr5 (Articles)

Idriss Amara, Embarek Ferkous, Fayçal Bentaleb, Razika Aouad

Engineering Vol.3 No.9, September 23, 2011

DOI: 10.4236/eng.2011.39114 5,517 Downloads 9,830 Views Citations
Synthesis and Characterization of Ultrafine Grained 304 Stainless Steel through Machining (Articles)

V. Senthilkumar, K. Lenin

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.5, April 20, 2011

DOI: 10.4236/jmmce.2011.105034 6,720 Downloads 8,406 Views Citations
Forgeability and Machinability of Stir Cast Aluminum Alloy Metal Matrix Composites (Articles)

Rabindra Behera, S. Das, D. Chatterjee, G. Sutradhar

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.10, August 10, 2011

DOI: 10.4236/jmmce.2011.1010072 8,452 Downloads 12,566 Views Citations
Application and Analysis of Force Control Strategies to Deburring and Grinding (Articles)

Frank Domroes, Carsten Krewet, Bernd Kuhlenkoetter

Modern Mechanical Engineering Vol.3 No.2A, June 21, 2013

DOI: 10.4236/mme.2013.32A002 6,544 Downloads 11,079 Views Citations
This article belongs to the Special Issue on Machinery Manufacturing and Its Automation
Research on the Deformation of Turbine Blades at Machining (Articles)

Masu Yamada, Keiji Sonoya, Takahito Sobayashi, Hiroshi Satoh

Energy and Power Engineering Vol.8 No.1, January 29, 2016

DOI: 10.4236/epe.2016.81001 5,520 Downloads 6,996 Views Citations
Fixture Design to Supplement Machining and Fuel Cell Education (Articles)

Yeong Ryu, Hazem Tawfik

Engineering Vol.9 No.5, May 27, 2017

DOI: 10.4236/eng.2017.95022 1,944 Downloads 3,369 Views Citations
Prediction of Wearing of Cutting Tools Using Real Time Machining Parameters and Temperature Using Rayleigh-Ham Method (Articles)

Jean Nyatte Nyatte, Fabrice Alban Epee, Wilba Christophe Kikmo, Samuel Batambock, Claude Valéry Ngayihi Abbe, Robert Nzengwa

Modern Mechanical Engineering Vol.13 No.2, May 31, 2023

DOI: 10.4236/mme.2023.132003 375 Downloads 1,202 Views Citations
Grey Relational Optimization of Turning Parameters in Dry Machining of Austenitic Stainless Steel Using Zr Based Coated Tools (Articles)

Kaushik Vijaya Prasad, Kishore Triambak Kashyap, Madapat Job Richard, Posina Gerard Prabhu Rao, Abhishek Rajole, Rabara Hiren

Open Journal of Applied Sciences Vol.7 No.7, July 14, 2017

DOI: 10.4236/ojapps.2017.77027 1,290 Downloads 2,673 Views Citations
Influence of Laser-Induced Bubble Formation on Laser Chemical Machining (Articles)

Marcel Simons, Tim Radel, Raj Shanta Kajsaravally, Frank Vollertsen

Journal of Surface Engineered Materials and Advanced Technology Vol.10 No.2, March 20, 2020

DOI: 10.4236/jsemat.2020.102002 749 Downloads 1,970 Views Citations
Process Window Expansion of Laser Chemical Machining by Using High Pressure (Articles)

Marcel Simons, Tim Radel, Frank Vollertsen

Materials Sciences and Applications Vol.11 No.5, May 8, 2020

DOI: 10.4236/msa.2020.115020 532 Downloads 1,446 Views Citations
Laterality and Accuracy of Force Exertion in Elbow Flexion (Articles)

Hiroki Aoki, Shinichi Demura

Advances in Physical Education Vol.7 No.1, February 28, 2017

DOI: 10.4236/ape.2017.71009 1,708 Downloads 2,778 Views Citations
Feedback Effect of Exertion Value on Accuracy of Knee Extension Strength Exertion Values (Articles)

Hiroki Aoki, Shin-Ichi Demura

Advances in Physical Education Vol.7 No.4, November 29, 2017

DOI: 10.4236/ape.2017.74041 949 Downloads 1,981 Views Citations
Study of Stability and Vibration Reduction in Multi-Tool Ultrasonic Machining under Simultaneous Primary and Internal Resonance (Articles)

Yaser Salah Hamed, Mohamed Syed Abd Elkader, Hamdi Mahmoud Genedi

Applied Mathematics Vol.3 No.1, January 4, 2012

DOI: 10.4236/am.2012.31001 6,033 Downloads 11,518 Views Citations
Multi-Objective Optimization Using Genetic Algorithms of Multi-Pass Turning Process (Articles)

Abdelouahhab Jabri, Abdellah El Barkany, Ahmed El Khalfi

Engineering Vol.5 No.7, July 15, 2013

DOI: 10.4236/eng.2013.57072 6,100 Downloads 10,338 Views Citations

First <12 3 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies