Lower Molding Temperature Limit - Articles - Scientific Research Publishing

Dependence of Lower Molding Temperature Limit and Molding Time on Molding Mechanism in Dental Thermoforming (Articles)

Mutsumi Takahashi, Masatoshi Takeuchi

Materials Sciences and Applications Vol.15 No.9, September 18, 2024

DOI: 10.4236/msa.2024.159024 138 Downloads 536 Views Citations
Research Progress of the Modification in Sulfur Concrete (Articles)

Xuemin You

Materials Sciences and Applications Vol.12 No.7, July 16, 2021

DOI: 10.4236/msa.2021.127024 779 Downloads 3,001 Views Citations
Parameter Prediction of Stretch-Blow Molding Process of PET Using Neural Networks (Articles)

Talal H. Alzanki, Mutaz M. Jafar

Journal of Software Engineering and Applications Vol.12 No.7, July 31, 2019

DOI: 10.4236/jsea.2019.127017 2,375 Downloads 10,771 Views Citations
Geddanken Experiment for Quark Star Idea, Quantum Wavelength Limit, Minimum Time, and Early Universe Temperature, from First Principles (Articles)

Andrew Walcott Beckwith

Journal of High Energy Physics, Gravitation and Cosmology Vol.2 No.4, August 24, 2016

DOI: 10.4236/jhepgc.2016.24042 1,414 Downloads 2,374 Views Citations
The Larger Grain and (111)-Orientation Planes of Poly-Ge Thin Film Grown on SiO₂ Substrate by Al-Induced Crystallization (Articles)

Shaoguang Dong, Junhuo Zhuang, Yaguang Zeng

Journal of Materials Science and Chemical Engineering Vol.6 No.2, February 13, 2018

DOI: 10.4236/msce.2018.62003 996 Downloads 2,388 Views Citations
A Preliminary of Dynamic Stability Analysis (Articles)

Ren Song, S. X. Wu

Open Journal of Applied Sciences Vol.6 No.6, June 27, 2016

DOI: 10.4236/ojapps.2016.66036 1,971 Downloads 3,085 Views Citations
Processed Low NO_x Fly Ash as a Filler in Plastics (Articles)

X. Huang, J.Y. Hwang, J.M. Gillis

Journal of Minerals and Materials Characterization and Engineering Vol.2 No.1, June 12, 2003

DOI: 10.4236/jmmce.2003.21002 7,782 Downloads 10,649 Views Citations
Effect of Thermal Shrinkage of Extruded Sheet on Mouthguard Thickness: Influence of Model Undercut (Articles)

Mutsumi Takahashi, Yogetsu Bando

Materials Sciences and Applications Vol.13 No.1, January 29, 2022

DOI: 10.4236/msa.2022.131004 310 Downloads 1,186 Views Citations
Effect of Molding Technique That Move Model Position Just before Formation in Production of Laminated Mouthguard (Articles)

Mutsumi Takahashi, Yogetsu Bando

Materials Sciences and Applications Vol.14 No.6, June 15, 2023

DOI: 10.4236/msa.2023.146020 250 Downloads 904 Views Citations
Fabrication and Mechanical Characterization of VARTM Epoxy Composites (Articles)

Abdallah Sulaiman Altobi, Yousuf Pasha Shaik

Open Access Library Journal Vol.13 No.4, April 24, 2026

DOI: 10.4236/oalib.1115157 12 Downloads 143 Views Citations
Withdraw: Improvement on Adhesion Properties of Insert Injection Molding Composites: Effect of Inserted Parts, Adhesive Lengths and Injection Conditions (Articles)

Badin Pinpathomrat, Hiroyuki Hamada

Open Journal of Composite Materials Vol.7 No.4, July 27, 2017

DOI: 10.4236/ojcm.2017.74013 1,477 Downloads 3,162 Views Citations
This article belongs to the Special Issue on Composite Interface and Damages
The Comparison of the Mechanical Characteristics of ABS Using Three Different Plastic Production Techniques (Articles)

Yousuf Pasha Shaik, Naresh Kumar Naidu, Venkat Reddy Yadavalli, Manish Reddy Muthyala

Open Access Library Journal Vol.10 No.5, May 24, 2023

DOI: 10.4236/oalib.1110097 490 Downloads 7,497 Views Citations
The Origin of Rings (Articles)

Mark Linick

Journal of High Energy Physics, Gravitation and Cosmology Vol.11 No.1, January 8, 2025

DOI: 10.4236/jhepgc.2025.111003 124 Downloads 660 Views Citations
Mg/Al complex oxides-A new type of solid basic catalyst for epoxidation (Articles)

Heng Miao, Shi-Chao Xu, Hai-Nan Wang, Wen-Xia Qin, Lin Lin Zhang, Ji-Mei Zhang, Juan Yang, Zhao Dai, Guo Zheng, En-Qi Tang

Journal of Biomedical Science and Engineering Vol.3 No.2, March 1, 2010

DOI: 10.4236/jbise.2010.32028 5,197 Downloads 10,111 Views Citations
Production and Properties of Short Jute and Short E-Glass Fiber Reinforced Polypropylene-Based Composites (Articles)

Md Nuruzzaman Khan, Juganta K. Roy, Nousin Akter, Haydar U. Zaman, Tuhidul Islam, Ruhul A. Khan

Open Journal of Composite Materials Vol.2 No.2, April 26, 2012

DOI: 10.4236/ojcm.2012.22006 9,571 Downloads 20,426 Views Citations
Modification and Development of a Blow Molding Machine (Articles)

Bassam A. Al-Helou

Engineering Vol.4 No.4, April 26, 2012

DOI: 10.4236/eng.2012.44025 7,844 Downloads 12,678 Views Citations
Simulation and Injection Molding of Ring-Shaped Polymer Bonded Nickel Braze Metal Composite Preforms Based on Rheological and Thermal Analyses (Articles)

Stefan Kirchberg

Open Journal of Composite Materials Vol.3 No.2, April 15, 2013

DOI: 10.4236/ojcm.2013.32004 6,041 Downloads 9,993 Views Citations
Reducing Refractive Index Variations in Compression Molded Lenses by Annealing (Articles)

Bo Tao, Lianguan Shen, Allen Yi, Mujun Li, Jian Zhou

Optics and Photonics Journal Vol.3 No.2B, July 18, 2013

DOI: 10.4236/opj.2013.32B029 5,246 Downloads 7,640 Views Citations
Chemical Modification on Woven Jute and Nonwoven Wet-Laid Glass Fiber Sheet Reinforced Poly-(ε-Caprolactone) Composites (Articles)

Mohammad Muzammel Hossen, Mohammad Obaidur Rahman

Open Journal of Composite Materials Vol.11 No.4, September 1, 2021

DOI: 10.4236/ojcm.2021.114006 524 Downloads 2,460 Views Citations
Development of EVA Foam Using Corn Pith as a Sustainable Filler (Articles)

Ranadheer Malyala, Jens Schuster, Rahul Kovuru, Shameem Akthar Shaik

Open Journal of Composite Materials Vol.15 No.4, October 9, 2025

DOI: 10.4236/ojcm.2025.154011 58 Downloads 677 Views Citations

First <12 3 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies