Liquid Composite Molding; Wicking; Fiber Tow; Lucas-Washburn Model; Permeability; Sizing - Articles

Experimental Characterization by Fluorescence of Capillary Flows in the Fiber Tows of Engineering Fabrics (Articles)

François LeBel, Amir Ershad Fanaei, Édu Ruiz, François Trochu

Open Journal of Inorganic Non-metallic Materials Vol.2 No.3, July 19, 2012

DOI: 10.4236/ojinm.2012.23004 6,968 Downloads 14,800 Views Citations
Withdraw: Improvement on Adhesion Properties of Insert Injection Molding Composites: Effect of Inserted Parts, Adhesive Lengths and Injection Conditions (Articles)

Badin Pinpathomrat, Hiroyuki Hamada

Open Journal of Composite Materials Vol.7 No.4, July 27, 2017

DOI: 10.4236/ojcm.2017.74013 1,438 Downloads 3,109 Views Citations
This article belongs to the Special Issue on Composite Interface and Damages
Production and Properties of Short Jute and Short E-Glass Fiber Reinforced Polypropylene-Based Composites (Articles)

Md Nuruzzaman Khan, Juganta K. Roy, Nousin Akter, Haydar U. Zaman, Tuhidul Islam, Ruhul A. Khan

Open Journal of Composite Materials Vol.2 No.2, April 26, 2012

DOI: 10.4236/ojcm.2012.22006 9,522 Downloads 20,317 Views Citations
Longitudinal Compressive Failure of Multiple-Fiber Model Composites for a Unidirectional Carbon Fiber Reinforced Plastic (Articles)

Tae Kun Jeong, Masahito Ueda

Open Journal of Composite Materials Vol.6 No.1, January 8, 2016

DOI: 10.4236/ojcm.2016.61002 5,344 Downloads 8,389 Views Citations
Simulation and Injection Molding of Ring-Shaped Polymer Bonded Nickel Braze Metal Composite Preforms Based on Rheological and Thermal Analyses (Articles)

Stefan Kirchberg

Open Journal of Composite Materials Vol.3 No.2, April 15, 2013

DOI: 10.4236/ojcm.2013.32004 5,976 Downloads 9,903 Views Citations
Effect of Thermal Shrinkage of Extruded Sheet on Mouthguard Thickness: Influence of Model Undercut (Articles)

Mutsumi Takahashi, Yogetsu Bando

Materials Sciences and Applications Vol.13 No.1, January 29, 2022

DOI: 10.4236/msa.2022.131004 285 Downloads 1,140 Views Citations
Effect of Wash Cycles and Polyester Fiber Blend Ratios on Wicking Behavior of Blended Knit Fabrics (Articles)

Kazi Md. Elias, Mohammad Obaidur Rahman, Engr H.M. Zakir Hossain

Materials Sciences and Applications Vol.16 No.8, August 26, 2025

DOI: 10.4236/msa.2025.168025 65 Downloads 373 Views Citations
Qualitative and Quantitative Perfusion Parameters Determined by 3D Single-Shot GRASE ASL MR Imaging (Articles)

Claus Kiefer, Frauke Kellner-Weldon, Marwan El-Koussy, Martinus Hauf, Gerhard Schroth

Open Journal of Medical Imaging Vol.2 No.1, March 28, 2012

DOI: 10.4236/ojmi.2012.21001 4,451 Downloads 8,320 Views Citations
Using Capillary Pressure Derived Parameters for Improving Permeability Prediction (Articles)

Amir Maher S. Lala

International Journal of Geosciences Vol.4 No.9, November 29, 2013

DOI: 10.4236/ijg.2013.49126 7,739 Downloads 11,628 Views Citations
A Fiber Pull-Out Based Model for Synthetic Fiber Reinforced Concrete Beams under a Flexural Load (Articles)

Alessandro Paglia

Open Journal of Civil Engineering Vol.3 No.3, August 29, 2013

DOI: 10.4236/ojce.2013.33025 6,062 Downloads 10,180 Views Citations
Effects of the Fiber Diameter on Mechanic Properties in Polymethyl-Methacrylate Composites Reinforced with Goose Feather Fiber (Articles)

Kenan Büyükkaya

Materials Sciences and Applications Vol.8 No.11, October 27, 2017

DOI: 10.4236/msa.2017.811059 1,322 Downloads 3,350 Views Citations
Comparative Study on Tribological Behavior of Graphene/Polyimide and Carbon Fibers/Polyimide Composites: A Review (Articles)

Niyobuhungiro Daniel, Hong Liu

World Journal of Engineering and Technology Vol.9 No.1, December 16, 2020

DOI: 10.4236/wjet.2021.91003 959 Downloads 2,327 Views Citations
Formulation of Composite Materials Using the Biomass from a Newly Developed Pineapple Leaf Fiber Extraction Process (Articles)

Tsair-Wang Chung, Chia-Chan Chen

Journal of Materials Science and Chemical Engineering Vol.13 No.5, May 30, 2025

DOI: 10.4236/msce.2025.135001 86 Downloads 667 Views Citations
An Experimental Investigation to Examine the Wicking Properties of Silk Fabrics (Articles)

Md Kamrul Hasan, Juramirza Kayumov, Guocheng Zhu, Munna Khatun, Asaduzzaman Nur, Xinbo Ding

Journal of Textile Science and Technology Vol.5 No.4, November 6, 2019

DOI: 10.4236/jtst.2019.54010 1,166 Downloads 4,280 Views Citations
Ionic Liquid as Useful Media for Dissolution, Derivatization, and Nanomaterial Processing of Chitin (Articles)

Jun-Ichi Kadokawa

Green and Sustainable Chemistry Vol.3 No.2A, May 27, 2013

DOI: 10.4236/gsc.2013.32A003 6,984 Downloads 12,278 Views Citations
This article belongs to the Special Issue on Ionic Liquids —— More Than Green Solvents
Fabrication and Characterization on Physico-Mechanical and Structural Properties of Sawdust Reinforced Acrylonitrile Butadiene Styrene (ABS) Composites (Articles)

Budrun Neher, Nabila Tasnim Nova, Rakib Hossain, M. A. Gafur, Farid Ahmed

Materials Sciences and Applications Vol.11 No.9, September 22, 2020

DOI: 10.4236/msa.2020.119043 1,213 Downloads 2,873 Views Citations
Exploring Bamboo Fiber Reinforced Acrylonitrile Butadiene Styrene (ABS) Polymer Composite by Characterization of Physical, Mechanical and Structural Properties (Articles)

Rabeya Akter, Md Rashedul Islam, Budrun Neher, Md Abdul Gafur, Farid Ahmed

Materials Sciences and Applications Vol.16 No.9, September 3, 2025

DOI: 10.4236/msa.2025.169027 83 Downloads 623 Views Citations
Determination of the Optimal Speed of Pultrusion for Large-Sized Composite Rods (Articles)

Aleksandr Krasnovskii, Iliya Kazakov

Journal of Encapsulation and Adsorption Sciences Vol.2 No.3, September 28, 2012

DOI: 10.4236/jeas.2012.23004 4,856 Downloads 8,033 Views Citations
Progress in Recycling of Composites with Polycyanurate Matrix (Articles)

Christian Dreyer, Dominik Söthje, Monika Bauer

Advances in Chemical Engineering and Science Vol.4 No.2, April 14, 2014

DOI: 10.4236/aces.2014.42020 5,262 Downloads 7,654 Views Citations
Preparation of Composite Particles by Forming Pickering Emulsion Followed by Drying-In-Liquid and Effect of Stepwise Addition of Solid Powder on Structure of Composite Particles (Articles)

Yasushi Akutsu, Yoshinari Taguchi, Masato Tanaka

Materials Sciences and Applications Vol.4 No.12, December 6, 2013

DOI: 10.4236/msa.2013.412100 4,803 Downloads 7,002 Views Citations

First <12 3 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies