Drum - Articles - Scientific Research Publishing

Interpreting the Symbolic Meaning of Dong Drum Tower Architectural Form—Taking Sanjiang Ma Fat Drum Tower as an Example (Articles)

Ying Fan

Open Access Library Journal Vol.9 No.5, May 12, 2022

DOI: 10.4236/oalib.1108652 103 Downloads 1,337 Views Citations
The Design of the Automobile Brake Cooling System (Articles)

Gaohui Li

Open Access Library Journal Vol.5 No.4, April 29, 2018

DOI: 10.4236/oalib.1104567 1,303 Downloads 7,755 Views Citations
Analysis of Steady Wear State of the Drum Brake (Articles)

István Páczelt, Attila Baksa, Zenon Mróz

Open Access Library Journal Vol.7 No.6, June 22, 2020

DOI: 10.4236/oalib.1106432 729 Downloads 2,413 Views Citations
Potential of Power Generation Utilizing Waste Kinetic Energy from Vehicles (Articles)

Wail Adaileh, Khaled Al-Qdah, Mayyas Mahasneh

Smart Grid and Renewable Energy Vol.3 No.2, May 23, 2012

DOI: 10.4236/sgre.2012.32015 6,786 Downloads 12,818 Views Citations
The Mathematical Simulation of Brush Drums in a Dual Saw Cylinder Chamber Gin for the Purpose of Increasing the Quantity of Captured Cotton Fiber from Saw (Articles)

Azizov Shuhrat Mamatovich, Karimov Abdusamat, Peter Arras

World Journal of Mechanics Vol.3 No.1, February 19, 2013

DOI: 10.4236/wjm.2013.31004 3,567 Downloads 6,541 Views Citations
Reduction of Environmental Impact of Drum Machine Washing (Articles)

Pieter Broer van der Weg (Peter)

Journal of Applied Mathematics and Physics Vol.8 No.1, January 8, 2020

DOI: 10.4236/jamp.2020.81011 920 Downloads 2,777 Views Citations
Influence of the Mode of Discrete Drum Speed and the Number of Inputs on the Technological Parameters of the Yarn Produced (Articles)

Yuldashev Jamshid

Engineering Vol.14 No.12, December 26, 2022

DOI: 10.4236/eng.2022.1412040 249 Downloads 773 Views Citations
Study of Optimal Parameters of Improved 1RX Regenerator (Articles)

Avazbek Azamatovich Obidov, Shavkat Olimdjanovich Mamadjanov

Engineering Vol.15 No.5, May 24, 2023

DOI: 10.4236/eng.2023.155023 196 Downloads 687 Views Citations
Improving Fiber Quality Output by Improving the Roll Box of the Gin Saw (Articles)

Sarimsakov Akramjon, Isroilov Sardorbek, Komilov Shukhratjon

Engineering Vol.15 No.4, April 25, 2023

DOI: 10.4236/eng.2023.154020 197 Downloads 835 Views Citations
Research on the Independence of the Cylinder Shaft with a Linter Machine (Articles)

Avazbek Obidov, Akhrorbek Abdurasulov

Engineering Vol.18 No.1, January 20, 2026

DOI: 10.4236/eng.2026.181001 55 Downloads 249 Views Citations
Asynchrony within Sessions in Improvised Active Music Therapy with Individuals with Parkinson’s Disease (Articles)

Tian Ip, Demian Kogutek

Advances in Parkinson's Disease Vol.15 No.1, February 28, 2026

DOI: 10.4236/apd.2026.151001 53 Downloads 248 Views Citations
Theoretical Study of Seed Movement in Cotton Seeds Selection Device (Articles)

Obidov Avazbek, Sultonov Mirzaolim

Engineering Vol.13 No.10, October 29, 2021

DOI: 10.4236/eng.2021.1310039 303 Downloads 1,244 Views Citations
Improvement of a Device for Cleaning Cotton from Small Impurities (Articles)

Avazbek Azamatovich Obidov, Dilnoza Abdulhamidqizi Khudayberdiyeva

Engineering Vol.17 No.8, August 20, 2025

DOI: 10.4236/eng.2025.178025 62 Downloads 396 Views Citations
Research on Factors Affecting the Operation of Cotton Cleaning Machine (Articles)

Akhmad Alokhodjayev, Mirzaolim Sultanov

Engineering Vol.18 No.2, January 29, 2026

DOI: 10.4236/eng.2026.182002 70 Downloads 314 Views Citations
Investigation of Working Bodies of the Device for Separation of Fibers Suitable for Spinning from Cotton Waste (Articles)

Avazbek Obidov, Mirzaolim Sultonov

Engineering Vol.12 No.12, December 30, 2020

DOI: 10.4236/eng.2020.1212063 743 Downloads 1,449 Views Citations
Methods for Reducing Seed Damage in the Technological Process of Cotton Processing (Articles)

Muradov Rustam, Isakhanov Khamidullo, Khosimov Khusanboy

Engineering Vol.14 No.3, March 25, 2022

DOI: 10.4236/eng.2022.143011 281 Downloads 1,156 Views Citations
Determining the Optimal Parameters of an Advanced Linter Machine (Articles)

Obidov Avazbek Azamatovich, A.J.B. O’g’li, Qosimov Axtam Akramovich

Engineering Vol.15 No.12, December 19, 2023

DOI: 10.4236/eng.2023.1512057 166 Downloads 654 Views Citations

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies