Dissimilar Aluminum Alloys - Articles - Scientific Research Publishing

Friction Stir Welding of Dissimilar Aluminum Alloys (Articles)

Hassan Abd El-Hafez, Abla El-Megharbel

World Journal of Engineering and Technology Vol.6 No.2, May 25, 2018

DOI: 10.4236/wjet.2018.62025 1,968 Downloads 5,732 Views Citations
Analysis of Laser Micro Welding of Copper-Aluminum Dissimilar Metals and Its Mechanism (Articles)

Jiang Huang, Wenqing Shi, Yuping Xie, Zhigang Liang, Jinming Zhan

Journal of Applied Mathematics and Physics Vol.7 No.12, December 24, 2019

DOI: 10.4236/jamp.2019.712224 696 Downloads 2,091 Views Citations
On the Electrical and Thermal Conductivities of Cast A356/Al₂O₃ Metal Matrix Nanocomposites (Articles)

El-Sayed Youssef El-Kady, Tamer Samir Mahmoud, Ali Abdel-Aziz Ali

Materials Sciences and Applications Vol.2 No.9, September 20, 2011

DOI: 10.4236/msa.2011.29159 7,159 Downloads 12,697 Views Citations
Bismuth Effect on the Mechanical Properties of Antifriction Al-Sn Alloys (Articles)

Isai Rosales, Gonzalo Gonzalez-Rodriguez, Jose Luis Gama, Rene Guardian

Materials Sciences and Applications Vol.5 No.5, April 30, 2014

DOI: 10.4236/msa.2014.55038 5,089 Downloads 6,876 Views Citations
Comparative Analysis of the Effects of Pressure on the Mechanical Properties and Microstructure of Die Cast Aluminum Alloys (Articles)

Kenneth N. Obiekea, Shekarau Y. Aku, Danjuma S. Yawas

Journal of Minerals and Materials Characterization and Engineering Vol.4 No.6, November 21, 2016

DOI: 10.4236/jmmce.2016.46029 1,841 Downloads 3,841 Views Citations
Effect of the Welding Parameters on the Structural and Mechanical Properties of Aluminium and Copper Sheet Joints by Electromagnetic Pulse Welding (Articles)

Irene Kwee, Verena Psyk, Koen Faes

World Journal of Engineering and Technology Vol.4 No.4, November 9, 2016

DOI: 10.4236/wjet.2016.44053 2,593 Downloads 4,721 Views Citations
Elevated Temperatures Tensile Characteristics of Cast A356/Al₂O₃ Nanocomposites Fabricated Using a Combination of Rheocasting and Squeeze Casting Techniques (Articles)

El-Sayed Youssef El-Kady, Tamer Samir Mahmoud, Mohamed Abdel-Aziz Sayed

Materials Sciences and Applications Vol.2 No.5, May 5, 2011

DOI: 10.4236/msa.2011.25050 9,301 Downloads 16,906 Views Citations
Effect of Hot Accumulative Roll Bonding Process on the Mechanical Properties of AA5083 (Articles)

Hassan Sheikh, Ebrahim Paimozd

Open Journal of Metal Vol.1 No.1, September 28, 2011

DOI: 10.4236/ojmetal.2011.11002 6,061 Downloads 14,559 Views Citations
Effect of Particulate Reinforcements on the Mechanical Properties of Al6061-WC and Al6061-Gr MMCs (Articles)

A. R. K. Swamy, A. Ramesha, G.B. Veeresh Kumar, J. N. Prakash

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.12, October 10, 2011

DOI: 10.4236/jmmce.2011.1012087 11,880 Downloads 18,461 Views Citations
The Heat Treatment Behavior of Super-High Strength Aluminum Alloys by Spray Forming (Articles)

Guowei Zhang, Zheng Chen, Xiurong Zhu, Gang Chen, Jing Zhai, Anzhen Guo

Journal of Materials Science and Chemical Engineering Vol.1 No.5, November 7, 2013

DOI: 10.4236/msce.2013.15012 3,948 Downloads 7,233 Views Citations
Comparative Studies on Microstructure and Mechanical Properties of Granulated Blast Furnace Slag and Fly Ash Reinforced AA 2024 Composites (Articles)

Inampudi Narasimha Murthy, Nallabelli Arun Babu, Jinugu Babu Rao

Journal of Minerals and Materials Characterization and Engineering Vol.2 No.4, July 28, 2014

DOI: 10.4236/jmmce.2014.24037 5,105 Downloads 7,160 Views Citations
Nucleation of Fe-Rich Intermetallic Phases on α-Al₂O₃ Oxide Films in Al-Si Alloys (Articles)

Pilar Orozco-González, Manuel Castro-Román, Simitrio Maldonado-Ruíz, Sergio Haro-Rodríguez, Fabián Equihua-Guillén, Rodrigo Muñiz-Valdez, Salvador Luna-Álvarez, Miguel Montoya-Dávila, Alejandra Hernández-Rodríguez

Journal of Minerals and Materials Characterization and Engineering Vol.3 No.1, January 6, 2015

DOI: 10.4236/jmmce.2015.31003 4,670 Downloads 6,733 Views Citations
Neural Network Modeling and Prediction of Surface Roughness in Machining Aluminum Alloys (Articles)

N. Fang, N. Fang, P. Srinivasa Pai, N. Edwards

Journal of Computer and Communications Vol.4 No.5, May 13, 2016

DOI: 10.4236/jcc.2016.45001 3,070 Downloads 4,999 Views Citations
Effect of Heat Treatment on the Mechanical and Electrical Properties of Al-Co-Mn Alloys (Articles)

Isaí Rosales-Cadena, Rene Guardian-Tapia, Jose G. Pereyra-Hernández, Juan Antonio Ruiz-Ochoa

Journal of Minerals and Materials Characterization and Engineering Vol.13 No.3, May 30, 2025

DOI: 10.4236/jmmce.2025.133006 54 Downloads 468 Views Citations
Electrochemical Behavior of Alumix 321 PM and AA6061 Alloys in 3.5 wt% NaCl Solution by Electrochemical Impedance Spectroscopy Measurements (Articles)

Natacha Rostomov, William Judge, George Jarjoura

Journal of Materials Science and Chemical Engineering Vol.8 No.10, October 29, 2020

DOI: 10.4236/msce.2020.810005 495 Downloads 1,561 Views Citations
Influence of Thermomecaniques Treatments on the Proprietes of Al-5.8%Zn-2.7%Mg Alloy (Articles)

Mazouz Hamoudi, Bensaada Said, Mohamed Tewfik Bouziane

Materials Sciences and Applications Vol.3 No.8, August 22, 2012

DOI: 10.4236/msa.2012.38071 3,419 Downloads 5,987 Views Citations
Dynamic Behaviour of Cast A356/Al₂O₃ Aluminum Metal Matrix Nanocomposites (Articles)

E. Y. El-Kady, T. S. Mahmoud, A. A. El-Betar, M. Abdel-Aziz

Materials Sciences and Applications Vol.3 No.11, November 29, 2012

DOI: 10.4236/msa.2012.311118 4,470 Downloads 7,100 Views Citations
Effects of machining conditions on specific surface of PM_2.5 emitted during metal cutting (Articles)

Abdelhakim Djebara, Victor Songmene, Ali Bahloul

Health Vol.5 No.10B, October 30, 2013

DOI: 10.4236/health.2013.510A2005 4,782 Downloads 7,369 Views Citations
This article belongs to the Special Issue on PM 2.5 Effects on Health
Analysis of the Behavior of Local Cooking Utensils in Tap Water, Salt Tap Water and Vegetable Oil According to the Temperature (Articles)

Mamadou Babacar Ndiaye, Sandrine Bec, Bernard Coquillet, Ibrahima Khalil Cissé

Open Journal of Metal Vol.3 No.4, December 13, 2013

DOI: 10.4236/ojmetal.2013.34012 4,352 Downloads 6,982 Views Citations
The Inhibition Effect of Cinnamon Extract on Leaching of Aluminum Cook Wares in NaCl Solutions at Quasi-Cooking Condition (Articles)

Layla A. Al Juhaiman, Raesah A. Al-Shihry, Hassan M. Al Hazmei

Journal of Surface Engineered Materials and Advanced Technology Vol.5 No.4, September 23, 2015

DOI: 10.4236/jsemat.2015.54020 5,219 Downloads 6,590 Views Citations

First <12 3 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies