Casting; Corrosion Testing; Metal Matrix Composites; Surface Engineering. - Articles

Effect of Copper and Silicon Carbide Content on the Corrosion Resistance of Al-Mg Alloys in Acidic and Alkaline Solutions (Articles)

Ahmad T. Mayyas, Mohammad M. Hamasha, Abdalla Alrashdan, Adel M. Hassan, Mohammed T. Hayajneh

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.4, April 20, 2012

DOI: 10.4236/jmmce.2012.114025 6,066 Downloads 8,479 Views Citations
Equal Channel Angular Pressing of Al-SiC Composites Fabricated by Stir Casting (Articles)

Farouk Shehata, Nahed ElMahallawy, Mohamed Arab, Mohamed Agwa

Open Journal of Metal Vol.3 No.2A, July 16, 2013

DOI: 10.4236/ojmetal.2013.32A1004 5,756 Downloads 10,982 Views Citations
This article belongs to the Special Issue on
Evaluation of Wear and Corrosion Properties of AA6061/TiB₂ Composites Produced by FSP Technique (Articles)

Dakarapu Santha Rao, Nallu Ramanaiah

Journal of Minerals and Materials Characterization and Engineering Vol.5 No.6, October 19, 2017

DOI: 10.4236/jmmce.2017.56029 1,420 Downloads 3,661 Views Citations
Tribological Behaviour of Aluminium/Alumina/Graphite Hybrid Metal Matrix Composite Using Taguchi’s Techniques (Articles)

N. Radhika, R. Subramanian, S. Venkat Prasat

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.5, April 20, 2011

DOI: 10.4236/jmmce.2011.105032 11,847 Downloads 20,090 Views Citations
Influence of Machining Parameter on Tool Life While Machining Hybrid Metal Matrix Composites (Articles)

C. R. Prakash Rao, V. Ravi Kumar, D. V. Ravi Kumar, Poorna Chandra, M. Vedavyasa, M. S. Rajagopal

Journal of Minerals and Materials Characterization and Engineering Vol.8 No.6, November 6, 2020

DOI: 10.4236/jmmce.2020.86028 860 Downloads 2,418 Views Citations
Corrosion Behavior of Cenosphere Reinforced Al7075 Metal Matrix Composite
—An Experimental Approach (Articles)

Ravi Kumar D. V., Seenappa, C. R. Prakash Rao, V. Bharat

Journal of Minerals and Materials Characterization and Engineering Vol.6 No.3, May 25, 2018

DOI: 10.4236/jmmce.2018.63030 1,382 Downloads 3,169 Views Citations
Influence of Reinforcement Type on Microstructure, Hardness, and Tensile Properties of an Aluminum Alloy Metal Matrix Composite (Articles)

Belete Sirahbizu Yigezu, Manas Mohan Mahapatra, Pradeep Kumar Jha

Journal of Minerals and Materials Characterization and Engineering Vol.1 No.4, July 4, 2013

DOI: 10.4236/jmmce.2013.14022 7,993 Downloads 13,215 Views Citations
Evaluation of HEBM Mechanical Alloying of Al₂O₃—356/7075 Powder Mixture (Articles)

G. Govender, Lilian Ivanchev, H. Burger, A. Mulaba, H. Chikwande

Open Journal of Composite Materials Vol.2 No.2, April 26, 2012

DOI: 10.4236/ojcm.2012.22007 5,382 Downloads 10,269 Views Citations
Effect of Nitriding on Wear Behavior of Graphite Reinforced Aluminum Alloy Composites (Articles)

Bhujang Mutt Girish, Bhujang Mutt Satish, Hanyalu Ramegowda Vitala

Journal of Surface Engineered Materials and Advanced Technology Vol.1 No.2, July 21, 2011

DOI: 10.4236/jsemat.2011.12011 5,250 Downloads 10,464 Views Citations
Corrosion Behaviour of TiC-Reinforced Hadfield Manganese Austenitic Steel Matrix In-Situ Composites (Articles)

Ashok Kumar, Srivastava, Karabi Das

Open Journal of Metal Vol.5 No.2, June 30, 2015

DOI: 10.4236/ojmetal.2015.52002 4,973 Downloads 6,463 Views Citations
Experimental Investigation on the Effect of Reinforcement Particles on the Forgeability and the Mechanical Properties of Aluminum Metal Matrix Composites (Articles)

S. Das, R. Behera, A. Datta, G. Majumdar, B. Oraon, G. Sutradhar

Materials Sciences and Applications Vol.1 No.5, December 1, 2010

DOI: 10.4236/msa.2010.15045 7,505 Downloads 15,080 Views Citations
Development of Aluminium Based Silicon Carbide Particulate Metal Matrix Composite (Articles)

Manoj Singla, D. Deepak Dwivedi, Lakhvir Singh, Vikas Chawla

Journal of Minerals and Materials Characterization and Engineering Vol.8 No.6, June 20, 2009

DOI: 10.4236/jmmce.2009.86040 23,323 Downloads 43,155 Views Citations
Preparation of Al-5Ti Master Alloys for the In-Situ Processing of Al-TiC Metal Matrix Composites (Articles)

Satish Babu Boppana, K . Chennakeshavalu

Journal of Minerals and Materials Characterization and Engineering Vol.8 No.7, July 20, 2009

DOI: 10.4236/jmmce.2009.87049 6,379 Downloads 8,782 Views Citations
Study of Wear Properties of Al-SiC Composites (Articles)

Manoj Singla, Lakhvir Singh, Vikas Chawla

Journal of Minerals and Materials Characterization and Engineering Vol.8 No.10, October 20, 2009

DOI: 10.4236/jmmce.2009.810070 7,932 Downloads 12,489 Views Citations
Electrolytic Co-Deposition Mechanisms, Texture Layers, and Residual Stresses in Nanocomposite Coatings Processes: A Review (Articles)

Noureddine Elboughdiri

Advances in Chemical Engineering and Science Vol.13 No.2, March 3, 2023

DOI: 10.4236/aces.2023.132007 305 Downloads 1,493 Views Citations
Identification of Optimum Composition and Mechanical Properties of Al-Ni Metal Matrix Composite (Articles)

Manoj Kumar Pal, Simranjeet Singh Sandhu, Rohan Kalia, Arka Ghosh

Journal of Minerals and Materials Characterization and Engineering Vol.3 No.4, July 8, 2015

DOI: 10.4236/jmmce.2015.34035 3,955 Downloads 6,204 Views Citations
Evaluation of Filler Distribution in Particulate Reinforced Composites (Articles)

Kurganova Yuliya, Lopatina Yuliya, Yijin Chen

Journal of Materials Science and Chemical Engineering Vol.3 No.7, July 1, 2015

DOI: 10.4236/msce.2015.37014 3,125 Downloads 4,750 Views Citations
Development and Characterization of Aluminium-Based Metal Matrix Composites (Articles)

M. A. Gafur, Al Fahad Ahmed, Raisul Abrar, Surya Sabrin Soshi

Materials Sciences and Applications Vol.14 No.1, January 29, 2023

DOI: 10.4236/msa.2023.141001 469 Downloads 2,350 Views Citations
Finite Element Wear Behavior Modeling of Al/Al₂SiO₅/C Chilled Hybrid Metal Matrix Composites (CHMMCs) (Articles)

Joel Hemanth

Materials Sciences and Applications Vol.2 No.7, July 29, 2011

DOI: 10.4236/msa.2011.27118 7,156 Downloads 12,413 Views Citations
Evaluation of Characteristics of Interfacial Phases Produced in Al/Ni₃Al Composite during Manufacturing (Articles)

Seyed Abdolkarim Sajjadi, Maryam Abbasi, Mazyar Azadbeh

Materials Sciences and Applications Vol.2 No.9, September 20, 2011

DOI: 10.4236/msa.2011.29182 5,025 Downloads 9,312 Views Citations

First <12 3 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies