Bending Testing - Articles - Scientific Research Publishing

Relationship between the Initial Fracture Stress and Fatigue Limit—Simple Prediction Method of Tensile Fatigue Limit of Composite (Articles)

Y. Imai, K. Nishitani, G. Fortin, A. Ohtani, H. Hamada

Open Journal of Composite Materials Vol.9 No.4, September 24, 2019

DOI: 10.4236/ojcm.2019.94021 1,171 Downloads 2,554 Views Citations
Study of the Characteristics of Large-Diameter Iron Bars Obtained by Rolling at the ODHAV Foundry in the Republic of Guinea (Articles)

Alpha Issa Diallo, Jean Ahmadou Kourouma, Adama Moussa Sakho, Younoussa Moussa Baldé, Mamadou Madaniou Sow, Alexandre Lucien Richard

Journal of Materials Science and Chemical Engineering Vol.12 No.6, June 27, 2024

DOI: 10.4236/msce.2024.126004 165 Downloads 615 Views Citations
The division and bending of green and red semiconductor laser light at the same time (Articles)

Remzi Yıldırım

Natural Science Vol.3 No.10, October 21, 2011

DOI: 10.4236/ns.2011.310114 4,902 Downloads 9,169 Views Citations
3-Point Bending of Bars and Rods Made of Materials Obeying a Ramberg-Osgood Criterion (Articles)

José Luis Lanzagorta, Antonio Martín-Meizoso

World Journal of Mechanics Vol.1 No.3, July 6, 2011

DOI: 10.4236/wjm.2011.13010 9,348 Downloads 16,833 Views Citations
Belt-Parallel Shortening in the Northern Apennines and Seismotectonic Implications (Articles)

Marcello Viti, Enzo Mantovani, Daniele Babbucci, Caterina Tamburelli, Nicola Cenni, Massimo Baglione, Vittorio D’Intinosante

International Journal of Geosciences Vol.6 No.8, August 31, 2015

DOI: 10.4236/ijg.2015.68075 4,097 Downloads 5,615 Views Citations
Numerical Investigation of Flexural Bending in Biaxial Braided Structures for Flexor Tendon Repair (Articles)

Jerry Ochola, Benny Malengier, Lieva Van Langenhove

Journal of Biomedical Science and Engineering Vol.13 No.6, June 11, 2020

DOI: 10.4236/jbise.2020.136009 610 Downloads 1,941 Views Citations
Obsidian: Pattern-Based Unit Test Implementations (Articles)

James Bowring, Hunter Hegler

Journal of Software Engineering and Applications Vol.7 No.2, February 14, 2014

DOI: 10.4236/jsea.2014.72011 4,809 Downloads 7,058 Views Citations
Literature Review of Language Testing Theories and Approaches (Articles)

Anmin Mao

Open Access Library Journal Vol.9 No.5, May 19, 2022

DOI: 10.4236/oalib.1108741 595 Downloads 7,175 Views Citations
New Methods Testing of Adhesion of the Coating to Sheet Metal by Bending (Articles)

Milan Dvořák, Emil Schwarzer

Journal of Surface Engineered Materials and Advanced Technology Vol.2 No.2, April 5, 2012

DOI: 10.4236/jsemat.2012.22011 7,457 Downloads 12,893 Views Citations
Effect of Stacking Fault Energy on the Mechanism of Texture Formation during Alternating Bending of FCC Metals and Alloys (Articles)

Natalia Shkatulyak

International Journal of Nonferrous Metallurgy Vol.2 No.2, April 18, 2013

DOI: 10.4236/ijnm.2013.22005 6,898 Downloads 11,646 Views Citations
Peridynamic Solutions for Timoshenko Beams (Articles)

E. Thomas Moyer, Michael J. Miraglia

Engineering Vol.6 No.6, May 26, 2014

DOI: 10.4236/eng.2014.66034 7,299 Downloads 9,980 Views Citations
Springback of I-Section Beam after Pure Bending with von Mises Criteria (Articles)

Reham Saleh, Gamal Ali, Abla El-Megharbel

World Journal of Engineering and Technology Vol.6 No.1, February 2, 2018

DOI: 10.4236/wjet.2018.61006 1,038 Downloads 2,400 Views Citations
Assessment of Existing Bridge’s Beam Bending Stiffness Using Crack Characteristics (Articles)

Donglian Tan

Engineering Vol.12 No.2, February 10, 2020

DOI: 10.4236/eng.2020.122008 857 Downloads 2,605 Views Citations
Review of Bending (Static & Dynamic) Behavior of Multilayer/Sandwich Concrete Slabs with Interlayer Connections (Articles)

Abdelrahman Ali, Erjun Wu, Omer Abdelaziz

Open Journal of Civil Engineering Vol.15 No.4, October 24, 2025

DOI: 10.4236/ojce.2025.154032 83 Downloads 494 Views Citations
Fabrication and Mechanical Characterization of VARTM Epoxy Composites (Articles)

Abdallah Sulaiman Altobi, Yousuf Pasha Shaik

Open Access Library Journal Vol.13 No.4, April 24, 2026

DOI: 10.4236/oalib.1115157 12 Downloads 143 Views Citations
Bending Analysis of a Filament-Wound Composite Tube (Articles)

Gyula Szabó, Károly Váradi, Dávid Felhős

Modern Mechanical Engineering Vol.8 No.1, February 28, 2018

DOI: 10.4236/mme.2018.81005 2,047 Downloads 5,496 Views Citations
Towards Semantic Mutation Testing of Aspect-Oriented Programs (Articles)

Abdul Azim Abdul Ghani

Journal of Software Engineering and Applications Vol.6 No.10A, October 4, 2013

DOI: 10.4236/jsea.2013.610A002 5,848 Downloads 8,706 Views Citations
This article belongs to the Special Issue on Software Testing
Detection of Damage and Crack in Railhead by Using Eddy Current Testing (Articles)

Zenglu Song, Tsutomu Yamada, Hideki Shitara, Yasushi Takemura

Journal of Electromagnetic Analysis and Applications Vol.3 No.12, December 29, 2011

DOI: 10.4236/jemaa.2011.312082 9,046 Downloads 16,592 Views Citations
A Survey of Software Test Estimation Techniques (Articles)

Kamala Ramasubramani Jayakumar, Alain Abran

Journal of Software Engineering and Applications Vol.6 No.10A, October 29, 2013

DOI: 10.4236/jsea.2013.610A006 9,188 Downloads 14,335 Views Citations
This article belongs to the Special Issue on Software Testing
A Statistical Theory of the Damage of Materials (Articles)

Georgi Zachariev

Modern Mechanical Engineering Vol.6 No.4, November 30, 2016

DOI: 10.4236/mme.2016.64013 3,045 Downloads 6,240 Views Citations
This article belongs to the Special Issue on Damage and Fracture Mechanics

First <12 3 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies