Al-Al2O3 Compacts; Porosity; Spring Back; Residual Stress; Sintering - Articles

Effect of Al₂O₃ Content and Process Variables on Structure and Properties of Al-Al₂O₃ Compacts (Articles)

Arindam Ghosh, Subrata Chatterjee

Journal of Minerals and Materials Characterization and Engineering Vol.2 No.2, March 24, 2014

DOI: 10.4236/jmmce.2014.22016 5,029 Downloads 6,571 Views Citations
Sintering Kinetics of Soft-Doped PZT (54/46) Systems (Articles)

M. D. Durruthy-Rodríguez, F. Calderón-Piñar, C. Malfatti, L. D. Pérez-Fernández

Journal of Modern Physics Vol.2 No.5, May 17, 2011

DOI: 10.4236/jmp.2011.25051 5,563 Downloads 10,095 Views Citations
A Numerical Approach on Reduction of Young’s Modulus During Deformation of Sheet Metals (Articles)

Chetan Nikhare

Modeling and Numerical Simulation of Material Science Vol.2 No.1, December 31, 2011

DOI: 10.4236/mnsms.2012.21001 4,397 Downloads 12,311 Views Citations
Electrical Conductivity of Spark Plasma Sintered W-Cu and Mo-Cu Composites for Electrical Contact Applications (Articles)

N. I. Amalu, B. A. Okorie, J. C. Ugwuoke, C. S. Obayi

Journal of Minerals and Materials Characterization and Engineering Vol.9 No.1, January 18, 2021

DOI: 10.4236/jmmce.2021.91004 681 Downloads 2,403 Views Citations
Comparative Residual Stress Analysis in Welded Joints Using Both Experimental and Numerical Techniques (Articles)

Rajshekhar B. Aloor, Ramakrishna H V, Nagabhushana Musalammagri

Journal of Minerals and Materials Characterization and Engineering Vol.7 No.4, June 20, 2019

DOI: 10.4236/jmmce.2019.74011 1,122 Downloads 2,578 Views Citations
An Overview of Techniques for Measuring Residual Stress in Metal Matrix Composites (Articles)

Qingping Wang, Pakeeza Maryum, Yuxin Liu

Journal of Materials Science and Chemical Engineering Vol.10 No.10, October 31, 2022

DOI: 10.4236/msce.2022.1010005 403 Downloads 2,499 Views Citations
Estimation of the Yield Stress of Stainless Steel from the Vickers Hardness Taking Account of the Residual Stress (Articles)

Osamu Takakuwa, Yusuke Kawaragi, Hitoshi Soyama

Journal of Surface Engineered Materials and Advanced Technology Vol.3 No.4, October 8, 2013

DOI: 10.4236/jsemat.2013.34035 10,852 Downloads 16,374 Views Citations
A New Energy-Efficient and Reliable Protocol for Stochastic WSNs Based on Back-Pressure and Entropy of Residual Energy (Articles)

Mohammed Almazaideh, Janos Levendovszky

Journal of Computer and Communications Vol.8 No.11, November 6, 2020

DOI: 10.4236/jcc.2020.811001 545 Downloads 1,465 Views Citations
Characterization of Porosity in a Laser Sintered MMCp Using X-Ray Synchrotron Phase Contrast Microtomography (Articles)

Emmanuelle Girardin, Chiara Renghini, Jack Dyson, Vittorio Calbucci, Francesca Moroncini, Gianni Albertini

Materials Sciences and Applications Vol.2 No.9, September 20, 2011

DOI: 10.4236/msa.2011.29180 6,220 Downloads 11,137 Views Citations
Synthesis, Characterizations and in Vitro Assessment of the Cytotoxicity and Genotoxicity of Novel Silicon Nitride-Based Porous Ceramics (Articles)

Miroslav Hnatko, Zoltán Lenčéš, Peter Čopan, Lucia Birošová, Patrik Matejov, Soňa Jantová

Materials Sciences and Applications Vol.4 No.7, June 28, 2013

DOI: 10.4236/msa.2013.47050 3,648 Downloads 6,416 Views Citations
Influence of Lycra Content and Stitch Length on the Dimensional and Physical Characteristics of Lycra Back Plaited Cotton (LBPC) Single Jersey Fabrics (Articles)

Md. Razib Sheikh, Md. Kawsar Hossain, Mohammad Mahmudur Rahman Khan

Journal of Textile Science and Technology Vol.8 No.4, September 21, 2022

DOI: 10.4236/jtst.2022.84015 317 Downloads 1,832 Views Citations
Feasibility Study on Chemical Flooding in Super High Porosity and Permeability Heavy Oil Reservoir (Articles)

Juan Zhao, Jian Zhang, Guang Yang

Journal of Materials Science and Chemical Engineering Vol.8 No.11, November 25, 2020

DOI: 10.4236/msce.2020.811004 487 Downloads 1,347 Views Citations
Evaluation of Stress Corrosion Cracking Damage to an API 5L X52 Pipeline Transporting Ammonia: A Case Study (Articles)

José Luis Mora-Mendoza, Mónica Jazmín Hernández-Gayosso, Daniel Antonio Morales-Serrat, Octaviano Roque-Oms, Digna Alejandra Del Angel, Gerardo Zavala-Olivares

Materials Sciences and Applications Vol.7 No.10, October 12, 2016

DOI: 10.4236/msa.2016.710050 2,444 Downloads 6,312 Views Citations
This article belongs to the Special Issue on Material Corrosion and Protection Research
Formation of X-120 M Line Pipe through J-C-O-E Technique (Articles)

Jai Dev Chandel, Nand Lal Singh

Engineering Vol.3 No.4, April 8, 2011

DOI: 10.4236/eng.2011.34046 14,057 Downloads 25,868 Views Citations
Nanoindentation Study of Al356-Al2O3 Nanocomposite Prepared by Ball Milling (Articles)

Y. Mazaheri, F. Karimzadeh, M. H. Enayati

Materials Sciences and Applications Vol.1 No.4, October 29, 2010

DOI: 10.4236/msa.2010.14034 7,583 Downloads 14,878 Views Citations
Sleep Deprivation Affects Working Memory in Low but Not in High Complexity for the N-Back Test (Articles)

Guadalupe J. Terán-Pérez, Alejandra E. Ruiz-Contreras, Rosa O. González-Robles, Rosario Tarrago-Castellanos, Roberto E. Mercadillo, Anabel Jiménez-Anguiano, Javier Velázquez-Moctezuma

Neuroscience and Medicine Vol.3 No.4, December 31, 2012

DOI: 10.4236/nm.2012.34047 6,439 Downloads 11,618 Views Citations
Numerical Analysis of Stresses on Layer-by-Layer Basis in FML Composite Cylinder Subjected to External Hydrostatic Loading (Articles)

B. G. Sumana, H. N. Vidya Sagar, K. V. Sharma, M. Krishna

Materials Sciences and Applications Vol.6 No.6, June 4, 2015

DOI: 10.4236/msa.2015.66052 5,379 Downloads 6,676 Views Citations
Analysis of Stress Strain State of X-60 Pipe Weld Joints Employing Magnetic-Anisotropy Indicator of Mechanical Stress (Articles)

Hamid Suliman Hamid Elhag, Nikulin Vasili, Isaac Einav, Yagoub Kamal Eldin

Engineering Vol.8 No.7, July 29, 2016

DOI: 10.4236/eng.2016.87046 2,175 Downloads 3,542 Views Citations
Glass Thickness and Fragmentation Behavior in Stressed Glasses (Articles)

Hoikwan Lee, Seoyeong Cho, Kyungmin Yoon, Jaeho Lee

New Journal of Glass and Ceramics Vol.2 No.4, October 30, 2012

DOI: 10.4236/njgc.2012.24020 10,444 Downloads 18,686 Views Citations
Optimizing the Conditions for Residual Stress Measurement Using a Two-Dimensional XRD Method with Specimen Oscillation (Articles)

Osamu Takakuwa, Hitoshi Soyama

Advances in Materials Physics and Chemistry Vol.3 No.1A, April 26, 2013

DOI: 10.4236/ampc.2013.31A002 6,766 Downloads 11,484 Views Citations
This article belongs to the Special Issue on X-Ray Diffraction

First <12 3 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies