Al Alloy - Articles - Scientific Research Publishing

Discontinuous Precipitation in Al-8% Mass.Mg Alloy under the Effect of Temperature (Articles)

Said Bensaada, Mohamed Tewfik Bouziane, Ferhat Mohammedi

Materials Sciences and Applications Vol.2 No.9, September 20, 2011

DOI: 10.4236/msa.2011.29172 4,836 Downloads 8,569 Views Citations
Study the Effect of Polymeric Quenching on Wear Resistance of Eutectic Modified Aluminium – Silicon Alloy (Articles)

Kahtan K. Al-Khazraji, Waleed A. Hanna, Osama S. Muhammed

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.10, August 10, 2011

DOI: 10.4236/jmmce.2011.1010073 7,049 Downloads 9,680 Views Citations
Effects of Heat Treatment on Microhardness of Some Al-Cu Alloy Prepared by Vacuum Coating (Articles)

Safdar Habibi, Babak Jaleh, Amir Namdarmanesh, Mojtaba Shamlo

Materials Sciences and Applications Vol.5 No.8, June 20, 2014

DOI: 10.4236/msa.2014.58053 3,821 Downloads 5,349 Views Citations
Preparation of Al-5Ti Master Alloys for the In-Situ Processing of Al-TiC Metal Matrix Composites (Articles)

Satish Babu Boppana, K . Chennakeshavalu

Journal of Minerals and Materials Characterization and Engineering Vol.8 No.7, July 20, 2009

DOI: 10.4236/jmmce.2009.87049 6,378 Downloads 8,774 Views Citations
Microstructure and Mechanical Properties of Ceramic Composites (Articles)

V.S. Aigbodion, J. O. Agunsoye, V. Kalu, F. Asuke, S. Ola

Journal of Minerals and Materials Characterization and Engineering Vol.9 No.6, June 20, 2010

DOI: 10.4236/jmmce.2010.96037 7,790 Downloads 11,096 Views Citations
Effect of In-Situ TiB₂ Particle Addition on the Mechanical Properties of AA 2219 Al Alloy Composite (Articles)

N.R. Rajasekaran, V. Sampath

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.6, May 10, 2011

DOI: 10.4236/jmmce.2011.106040 7,261 Downloads 9,851 Views Citations
Discontinuous Precipitation and Dissolution under the Influence of the Plastic Strain and Temperature in Al-15 at.%Zn and Al-30 at.%Zn Alloys (Articles)

Mazouz Hamoudi, Bensaada Said, Mohamed Tewfik, Bouziane Bouziane, Laboratoire Larhyss

Materials Sciences and Applications Vol.3 No.7, July 19, 2012

DOI: 10.4236/msa.2012.37061 5,121 Downloads 8,459 Views Citations
Thermal Analysis of the Impact of RT Storage Time on the Strengthening of an Al-Mg-Si Alloy (Articles)

A. Hayoune

Materials Sciences and Applications Vol.3 No.7, July 19, 2012

DOI: 10.4236/msa.2012.37065 3,365 Downloads 6,247 Views Citations
Modelling of Al-Cu-Mg-Fe-Ni Aluminium Alloy (Articles)

Dhia Kadhm Suker

Open Journal of Metal Vol.2 No.4, December 12, 2012

DOI: 10.4236/ojmetal.2012.24012 3,929 Downloads 8,613 Views Citations
Characterization of the A6060 Al Alloy Mainly by Using the Micro-Hardness Vickers Test in Order to Optimize the Industrial Solutionizing Conditions of the As-Cast Billets (Articles)

G. K. Triantafyllidis, I. Kiligaridis, D. I. Zagkliveris, I. Orfanou, S. Spyridopoulou, E. Mitoudi-Vagourdi, S. Semertzidou

Materials Sciences and Applications Vol.6 No.1, January 21, 2015

DOI: 10.4236/msa.2015.61011 3,253 Downloads 4,613 Views Citations
Natural Aging Effects on the Solutionizing Heat Treatment Process of the A6060 Al Alloy As-Cast Billets for Profile Production (Articles)

Georgios K. Triantafyllidis, Natalyia V. Pukhalska, Dimitrios I. Zagkliveris

Materials Sciences and Applications Vol.6 No.2, January 23, 2015

DOI: 10.4236/msa.2015.62014 3,561 Downloads 5,313 Views Citations
Numerical Simulation of Microstructural Evolution via Phase-Field Model Coupled to the Solutal Interaction Mechanism (Articles)

Alexandre Furtado Ferreira, Ingrid Meirelles Salvino Tomaskewski, Késsia Gomes Paradela, Dimas Moraes da Silva, Roberto Carlos Sales

Materials Sciences and Applications Vol.6 No.10, October 30, 2015

DOI: 10.4236/msa.2015.610092 4,890 Downloads 6,637 Views Citations
Corrosion Resistance of Stamped Al Alloy 6451 with PEO Coating (Articles)

Yuanming Zheng, Zihan Zhou, Jairui Li, Tianyi Zhang, Wutian Shen, Peilin Ying, Henry Hu, Xueyuan Nie

Journal of Materials Science and Chemical Engineering Vol.14 No.5, May 28, 2026

DOI: 10.4236/msce.2026.145004 32 Downloads 152 Views Citations
A Comparative Study on the Microstructures and Mechanical Properties of Al 6061 Alloy and the MMC Al 6061/TiB₂/12_p (Articles)

T.V. Christy, N. Murugan, S. Kumar

Journal of Minerals and Materials Characterization and Engineering Vol.9 No.1, January 20, 2010

DOI: 10.4236/jmmce.2010.91005 13,286 Downloads 24,422 Views Citations
The Development of Mathematical Model for the Prediction of Ageing Behaviour for Al-Cu-Mg/Bagasse Ash Particulate Composites (Articles)

V.S. Aigbodion, S.B. Hassan, E.T. Dauda, R.A. Mohammed

Journal of Minerals and Materials Characterization and Engineering Vol.9 No.10, October 20, 2010

DOI: 10.4236/jmmce.2010.910066 5,594 Downloads 7,790 Views Citations
Predictability of Al-Mn Alloy Exposure Time Based on Its As-Cast Weight and Corrosion Rate in Sea Water Environment (Articles)

Chukwuka Nwoye, Simeon Neife, Ebere Ameh, Awo Nwobasi, Ndubuisi Idenyi

Journal of Minerals and Materials Characterization and Engineering Vol.1 No.6, November 26, 2013

DOI: 10.4236/jmmce.2013.16046 3,160 Downloads 4,748 Views Citations
Investigation on Microstructure and Grain Refining Performance of a New Type of Al-3Ti-1C Master Alloy (Articles)

Vahid Hassanbeygi, Ali Shafyei

Open Journal of Metal Vol.4 No.3, August 27, 2014

DOI: 10.4236/ojmetal.2014.43006 4,868 Downloads 6,359 Views Citations
Effect of Retrogression and Reaging on Stress Corrosion Cracking of Spray Formed Al Alloy (Articles)

Ruiming Su, Yingdong Qu, Xiang Li, Junhua You, Rongde Li

Materials Sciences and Applications Vol.7 No.1, January 28, 2016

DOI: 10.4236/msa.2016.71001 4,952 Downloads 6,945 Views Citations
Study on Key Joining Technology and Test Method of Steel/Al Hybrid Structure Body-in-White (Articles)

Lijun Han, Fuyang Liu, Changhua Liu

Journal of Materials Science and Chemical Engineering Vol.12 No.4, April 30, 2024

DOI: 10.4236/msce.2024.124009 238 Downloads 830 Views Citations
Effects of Pre-Strain on Bake Hardenability and Precipitation Behavior of Al-Mg-Si Automotive Body Sheets (Articles)

Guanjun Gao, Lizhen Yan, Xiwu Li

Journal of Materials Science and Chemical Engineering Vol.12 No.7, July 31, 2024

DOI: 10.4236/msce.2024.127005 178 Downloads 724 Views Citations

First <12 3 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies