Additive Manufacturing AM - Articles - Scientific Research Publishing

Surface Roughness Quality and Dimensional Accuracy—A Comprehensive Analysis of 100% Infill Printed Parts Fabricated by a Personal/Desktop Cost-Effective FDM 3D Printer (Articles)

Mohammad S. Alsoufi, Abdulrhman E. Elsayed

Materials Sciences and Applications Vol.9 No.1, January 5, 2018

DOI: 10.4236/msa.2018.91002 5,313 Downloads 14,892 Views Citations
Mechanical Properties, Metallurgical Characteristics and Anisotropy of Additive Manufacturing of 316L (Articles)

D. Moreno, Y. Nahmana, O. Nafman, O. Kam, B. Wolfman, A. Y. Cohen, M. Shapira

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.2, March 31, 2022

DOI: 10.4236/jmmce.2022.102017 985 Downloads 2,607 Views Citations
Optimization of Extrusion Process Parameters of Recycled High-Density Polyethylene-Thermoplastic Starch Composite for Fused Filament Fabrication (Articles)

Grace Njeri Wamuti, James Wamai Mwangi, Samuel Kabini Karanja, Leif Micke, Henning Zeidler

Open Journal of Composite Materials Vol.13 No.4, September 25, 2023

DOI: 10.4236/ojcm.2023.134006 367 Downloads 1,853 Views Citations
Improved Transfer Process for the Fully Additive Manufacturing of a Conductive Layer-Stacked Polymeric Cantilever (Articles)

Shusuke Kanazawa, Yasuyuki Kusaka, Noritaka Yamamoto, Hirobumi Ushijima

Materials Sciences and Applications Vol.10 No.1, January 14, 2019

DOI: 10.4236/msa.2019.101005 927 Downloads 1,896 Views Citations
This article belongs to the Special Issue on Material Processing
Additive Manufacturing of SiC Ceramics with Complicated Shapes Using the FDM Type 3D-Printer (Articles)

Hisaya Masuda, Yoshio Ohta, Mikito Kitayama

Journal of Materials Science and Chemical Engineering Vol.7 No.2, February 26, 2019

DOI: 10.4236/msce.2019.72001 2,832 Downloads 5,498 Views Citations
Application and Development of 3D Printing in Medical Field (Articles)

Sun Chunhua, Shang Guangqing

Modern Mechanical Engineering Vol.10 No.3, August 10, 2020

DOI: 10.4236/mme.2020.103003 2,145 Downloads 10,080 Views Citations
Research Progress of Additive Manufacturing Technology in Energetic Material Field at Home and Abroad (Articles)

Runpeng Jiang

Journal of Materials Science and Chemical Engineering Vol.12 No.3, March 29, 2024

DOI: 10.4236/msce.2024.123005 367 Downloads 1,340 Views Citations
Design Consideration for Additive Manufacturing: Fused Deposition Modelling (Articles)

Ala’aldin Alafaghani, Ala Qattawi, Muhammad Ali Ablat

Open Journal of Applied Sciences Vol.7 No.6, June 29, 2017

DOI: 10.4236/ojapps.2017.76024 4,243 Downloads 11,699 Views Citations
Effect of 3D Printing Technology on 3C Product Manufacturing (Articles)

Guangqing Shang, Chunhua Sun

World Journal of Engineering and Technology Vol.8 No.4, November 9, 2020

DOI: 10.4236/wjet.2020.84051 1,126 Downloads 6,067 Views Citations
Research on Biomimetic Additive Manufacturing Technology Based on Digital Twin (Articles)

Yongqi Chen, Yuduo Wei, Shaopeng Zheng

Journal of Applied Mathematics and Physics Vol.13 No.12, December 23, 2025

DOI: 10.4236/jamp.2025.1312245 83 Downloads 591 Views Citations
Additive Manufacturing: The Most Promising Technology to Alter the Supply Chain and Logistics (Articles)

Mohsen Attaran

Journal of Service Science and Management Vol.10 No.3, May 4, 2017

DOI: 10.4236/jssm.2017.103017 10,084 Downloads 18,705 Views Citations
This article belongs to the Special Issue on Supply Chain Management
A Design Modification Approach to Utilize the Benefits of Metal Additive Manufacturing Adoption (Articles)

Jun Hao Tan, Wee Koon Woon, Wai Leong Eugene Wong

Journal of Materials Science and Chemical Engineering Vol.4 No.7, July 25, 2016

DOI: 10.4236/msce.2016.47008 2,300 Downloads 4,632 Views Citations
Influence of Bed Temperature on Heat Shrinkage Shape Error in FDM Additive Manufacturing of the ABS-Engineering Plastic (Articles)

Young-Hyu Choi, Cheol-Min Kim, Hwan-Seock Jeong, Jeong-Ho Youn

World Journal of Engineering and Technology Vol.4 No.3D, October 20, 2016

DOI: 10.4236/wjet.2016.43D022 3,217 Downloads 8,010 Views Citations
The Impact of 3D Printing Technology to the Nigerian Manufacturing GDP (Articles)

Vincent A. Balogun, Omonigho B. Otanocha, Akii O. Ibhadode

Modern Mechanical Engineering Vol.8 No.2, May 15, 2018

DOI: 10.4236/mme.2018.82010 2,127 Downloads 6,126 Views Citations
Development of Laser Fusion Printing Machine for Ceramic Teeth Crown (Articles)

Risheng Zhang, Jialin Yang, Zhiqun Wu, Xiaohui Tang, Wei Yu, Shaoxing Ma, Fang Ji

Journal of Minerals and Materials Characterization and Engineering Vol.6 No.4, July 11, 2018

DOI: 10.4236/jmmce.2018.64033 1,599 Downloads 3,156 Views Citations
Laser Polishing of Laser Powder Bed Fusion AlSi10Mg Parts—Influence of Initial Surface Roughness on Achievable Surface Quality (Articles)

Markus Hofele, Andre Roth, Jochen Schanz, David K. Harrison, Anjali K. M. De Silva, Harald Riegel

Materials Sciences and Applications Vol.12 No.1, January 20, 2021

DOI: 10.4236/msa.2021.121002 1,283 Downloads 3,818 Views Citations
This article belongs to the Special Issue on Material Surface Engineering
On Application of Metal Additive Manufacturing (Articles)

Chunhua Sun, Guangqing Shang

World Journal of Engineering and Technology Vol.9 No.1, February 26, 2021

DOI: 10.4236/wjet.2021.91014 1,369 Downloads 4,209 Views Citations
Additively Manufactured Ti-6Al4V before and after Hot Isostatic Pressing (Articles)

Brad Baker, Keegan Wisdom

World Journal of Engineering and Technology Vol.9 No.2, May 8, 2021

DOI: 10.4236/wjet.2021.92019 1,596 Downloads 3,289 Views Citations
A Scientific Review on Various Pellet Extruders Used in 3D Printing FDM Processes (Articles)

Yousuf Pasha Shaik, Jens Schuster, Aarif Shaik

Open Access Library Journal Vol.8 No.8, July 29, 2021

DOI: 10.4236/oalib.1107698 1,464 Downloads 13,698 Views Citations
Effect of Laser Cladding Processing Parameters on Nitinol’s Clad Dimensions, Microstructure, and Hardness (Articles)

Engy M. Zain, Ahmed Farid Youssef, Ahmad El Sabbagh, Sisa Pityana, Mohamed A. Taha

Materials Sciences and Applications Vol.12 No.12, December 24, 2021

DOI: 10.4236/msa.2021.1212040 421 Downloads 1,539 Views Citations

First <12 3 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies