Taguchi Methods - Articles - Scientific Research Publishing

What can Software Engineers Learn from Manufacturing to Improve Software Process and Product? (Articles)

Norman SCHNEIDEWIND

Intelligent Information Management Vol.1 No.2, November 30, 2009

DOI: 10.4236/iim.2009.12015 5,620 Downloads 10,056 Views Citations
Selection of Best Materials and Parametric Optimization of Solar Parabolic Collector Using Fuzzy Logic (Articles)

Sri P. Mohana Reddy, Pathi Venkataramaiah, Devuru Vishnu Vardhan Reddy

Energy and Power Engineering Vol.6 No.14, December 12, 2014

DOI: 10.4236/epe.2014.614046 3,991 Downloads 5,903 Views Citations
A New Model for Strategy Formulation Using Mahalanobis-Taguchi System and Clustering Algorithm (Articles)

Ali Hadighi, Iraj Mahdavi

Intelligent Information Management Vol.3 No.5, September 20, 2011

DOI: 10.4236/iim.2011.35024 5,299 Downloads 9,939 Views Citations
Effect of Fly Ash Content on Friction and Dry Sliding Wear Behavior of Glass Fiber Reinforced Polymer Composites - A Taguchi Approach (Articles)

S.R. Chauhan, Anoop Kumar, I. Singh, Prashant Kumar

Journal of Minerals and Materials Characterization and Engineering Vol.9 No.4, April 20, 2010

DOI: 10.4236/jmmce.2010.94027 7,753 Downloads 11,517 Views Citations
Study of Potentiodynamic Polarization Behaviour of Electroless Ni-B Coatings and Optimization using Taguchi Method and Grey Relational Analysis (Articles)

Suman Kalyan Das, Prasanta Sahoo

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.14, November 25, 2011

DOI: 10.4236/jmmce.2011.1014103 6,859 Downloads 9,595 Views Citations
Minimalization of Ash from Iranian Gilsonite by Froth Flotation (Articles)

Ramona Javadi Doodran, Shayan Khakmardan, Aref Shirazi, Adel Shirazy

Journal of Minerals and Materials Characterization and Engineering Vol.9 No.1, December 23, 2020

DOI: 10.4236/jmmce.2021.91001 678 Downloads 2,937 Views Citations
Taguchi Optimization of Process Parameters in Friction Stir Welding of 6061 Aluminum Alloy: A Review and Case Study (Articles)

Mohamadreza Nourani, Abbas S. Milani, Spiro Yannacopoulos

Engineering Vol.3 No.2, March 18, 2011

DOI: 10.4236/eng.2011.32017 12,650 Downloads 27,419 Views Citations
Investigation and Optimization of Sn/Gr Lubricants Effects on Cold Extrudability of Fe-TiC Nanocomposite Using Taguchi Robust Design Method (Articles)

Seyed Abdolkarim Sajjadi, Seyed Mojtaba Zebarjad, Nasrin Sasani, Heydar Khadivi, Behrooz Naderi

Engineering Vol.3 No.7, July 20, 2011

DOI: 10.4236/eng.2011.37083 4,733 Downloads 8,500 Views Citations
Effect of Filler Materials on Dry Sliding Wear Behavior of Polymer Matrix Composites – A Taguchi Approach (Articles)

S. Basavarajappa, K.V. Arun, J. Paulo Davim

Journal of Minerals and Materials Characterization and Engineering Vol.8 No.5, May 20, 2009

DOI: 10.4236/jmmce.2009.85034 8,423 Downloads 12,483 Views Citations
Dry Sliding Wear Behaviour of Aluminium/Be₃Al₂(SiO₃)₆ Composite Using Taguchi Method (Articles)

H. B. Bhaskar, Abdul Sharief

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.7, July 25, 2012

DOI: 10.4236/jmmce.2012.117052 5,966 Downloads 8,998 Views Citations
Utilization of Industrial Waste Slag as Aggregate in Concrete Applications by Adopting Taguchi’s Approach for Optimization (Articles)

Mohammed Nadeem, Arun D. Pofale

Open Journal of Civil Engineering Vol.2 No.3, September 27, 2012

DOI: 10.4236/ojce.2012.23015 12,316 Downloads 23,286 Views Citations
Process Window Determination for Biofiltration by the Taguchi Method (Articles)

Man Chung Law, Hong Chua, Ka Po Cheng, Chi Wai Kan

Journal of Water Resource and Protection Vol.4 No.10, October 30, 2012

DOI: 10.4236/jwarp.2012.410095 3,833 Downloads 5,936 Views Citations
Wear Behaviour of Al-SiCp Metal Matrix Composites and Optimization Using Taguchi Method and Grey Relational Analysis (Articles)

Shouvik Ghosh, Prasanta Sahoo, Goutam Sutradhar

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.11, November 30, 2012

DOI: 10.4236/jmmce.2012.1111115 6,834 Downloads 11,449 Views Citations
An Application of the Taguchi Method (Robust Design) to Environmental Engineering: Evaluating Advanced Oxidative Processes in Polyester-Resin Wastewater Treatment (Articles)

Messias Borges Silva, Livia Melo Carneiro, João Paulo Alves Silva, Ivy dos Santos Oliveira, Hélcio José Izário Filho, Carlos Roberto de Oliveira Almeida

American Journal of Analytical Chemistry Vol.5 No.13, September 19, 2014

DOI: 10.4236/ajac.2014.513092 6,876 Downloads 9,771 Views Citations
Optimization of Carburized UNS G10170 Steel Process Parameters Using Taguchi Approach and Response Surface Model (RSM) (Articles)

Olawale Samuel Fatoba, Olaitan Lukman Akanji, Abiodun Samson Aasa

Journal of Minerals and Materials Characterization and Engineering Vol.2 No.6, November 10, 2014

DOI: 10.4236/jmmce.2014.26058 4,563 Downloads 6,457 Views Citations
Reduction of Undercuts in Fillet Welded Joints Using Taguchi Optimization Method (Articles)

Joseph Achebo, Sule Salisu

Journal of Minerals and Materials Characterization and Engineering Vol.3 No.3, May 12, 2015

DOI: 10.4236/jmmce.2015.33020 4,549 Downloads 5,761 Views Citations
Evaluation and Optimization of Tensile Strength Responses of Coir Fibres Reinforced Polyester Matrix Composites (CFRP) Using Taguchi Robust Design (Articles)

Ugochukwu Chuka Okonkwo, Christian Ebele Chukwunyelu, Bright Uchenna Oweziem, Okunzuwa Austine Ekuase

Journal of Minerals and Materials Characterization and Engineering Vol.3 No.4, June 4, 2015

DOI: 10.4236/jmmce.2015.34025 3,433 Downloads 5,010 Views Citations
Analysis on Multi Responses in Face Milling of Ammc Using Fuzzy-Taguchi Method (Articles)

Madiri Samuel Sukumar, Borra Vijay Sudheer Reddy, P. Venkataramaiah

Journal of Minerals and Materials Characterization and Engineering Vol.3 No.4, June 10, 2015

DOI: 10.4236/jmmce.2015.34028 2,856 Downloads 4,053 Views Citations
Cymbal Structural Optimization for Improving Piezoelectric Harvesting Efficiency with Taguchi’s Orthogonal Experiment (Articles)

Guangqing Shang, Wei Ning, Chunhua Sun

Journal of Power and Energy Engineering Vol.3 No.10, October 29, 2015

DOI: 10.4236/jpee.2015.310002 3,740 Downloads 4,845 Views Citations
Determining the Effect of Cutting Fluids on Surface Roughness in Turning AISI 1330 Alloy Steel Using Taguchi Method (Articles)

Onyemachi Joachim Onuoha, James Oseni Abu, Sunday Albert Lawal, Edeki Mudiare, Michael Bolaji Adeyemi

Modern Mechanical Engineering Vol.6 No.2, May 5, 2016

DOI: 10.4236/mme.2016.62006 4,093 Downloads 7,542 Views Citations

First <12 3 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies