Hammer Mill - Articles - Scientific Research Publishing

A Comparative Technique for Performance Evaluation of Hammer Mill and Disk Mill in Yam Flour Processing (Articles)

Joseph B. Bassey, Isaac F. Odesola, Joshua A. Olawuyi

World Journal of Engineering and Technology Vol.10 No.3, August 18, 2022

DOI: 10.4236/wjet.2022.103040 486 Downloads 2,656 Views Citations
Windmills in The Netherlands (Articles)

Teun Koetsier

Advances in Historical Studies Vol.14 No.1, February 11, 2025

DOI: 10.4236/ahs.2025.141002 149 Downloads 1,260 Views Citations
This article belongs to the Special Issue on ‘Findings in the History of Machines and Mechanisms’ from 8th IFToMM Symposium on International Symposium on History of Machines and Mechanisms In Ankara, Turkey, April 18-20, 2024
Structure Parameters Optimization Analysis of Hydraulic Hammer System (Articles)

Guoping Yang, Jian Fang

Modern Mechanical Engineering Vol.2 No.4, November 30, 2012

DOI: 10.4236/mme.2012.24018 6,324 Downloads 11,585 Views Citations
Encapsulated Water Hammer: Theoretical/Experimental Study (Articles)

Geanette Polanco, Muhammad Shakeel Virk, Umair N. Mughal, Sojo Victor, Da Paixao José, Vidal Antonio, Aguillón Orlando

World Journal of Engineering and Technology Vol.3 No.3C, October 23, 2015

DOI: 10.4236/wjet.2015.33C043 3,980 Downloads 5,345 Views Citations
Application of the Combined Method for Evaluating the Compressive Strength of Concrete on Site (Articles)

Samia Hannachi, Mohamed Nacer Guetteche

Open Journal of Civil Engineering Vol.2 No.1, March 13, 2012

DOI: 10.4236/ojce.2012.21003 14,315 Downloads 26,456 Views Citations
Optimization of Blasting Parameters Using Regression Models in Ratcon and NSCE Granite Quarries, Ibadan, Oyo State, Nigeria (Articles)

Jide Muili Akande, Abiodun Ismail Lawal

Geomaterials Vol.3 No.1, January 24, 2013

DOI: 10.4236/gm.2013.31004 9,613 Downloads 15,816 Views Citations
Test and Evaluation of Stiffness of a Pin Turning Device for Large Marine Engine Crankshafts (Articles)

Y. H. Choi, G. B. Ha, D. H. Kim, H. S. An

Journal of Power and Energy Engineering Vol.1 No.7, November 28, 2013

DOI: 10.4236/jpee.2013.17003 4,024 Downloads 6,218 Views Citations
Contribution to the Analytical Equation Resolution Using Charts for Analysis and Design of Cylindrical and Conical Open Surge Tanks (Articles)

Aboudou Seck, Musandji Fuamba

Journal of Water Resource and Protection Vol.7 No.15, October 22, 2015

DOI: 10.4236/jwarp.2015.715101 3,713 Downloads 5,494 Views Citations
Production of Iron from Mill Scale Industrial Waste via Hydrogen (Articles)

N. M. Gaballah, A. F. Zikry, M. G. Khalifa, A. B. Farag, N. A. El-Hussiny, M. E. H. Shalabi

Open Journal of Inorganic Non-metallic Materials Vol.3 No.3, July 15, 2013

DOI: 10.4236/ojinm.2013.33005 9,234 Downloads 19,755 Views Citations
Macro and Micro Nutrient Supply to Soil and Plants from Sugar Mill Mud (Articles)

Ishrat Jahan Sanchary, Kazi Md. Jahangir Kabir, Shah Muhammad Imamul Huq

Agricultural Sciences Vol.10 No.2, February 26, 2019

DOI: 10.4236/as.2019.102014 1,183 Downloads 3,307 Views Citations
Silk Mills in the Early Modern Italy (Articles)

Stefano Comino, Alessandro Gasparetto

Advances in Historical Studies Vol.9 No.5, December 8, 2020

DOI: 10.4236/ahs.2020.95022 825 Downloads 5,363 Views Citations
This article belongs to the Special Issue on ‘Findings on history of Italian mechanical Engineering’ from IFIT 2020, the Third International Conference of IFToMM ITALY
Isolation of Bacteria with Purifying Potential and Application in the Treatment of Effluents from an Artisanal Palm Oil Mill in the Littoral Region of Cameroon (Articles)

Djien Nyami Félicité, Noubou Takam Daïna, Fobasso Tagnikeu Roméo, Tcheugoue Styve Joël, Njicoumbe Fatima, Ndzobo Ndzana Joël, Kuessie Yanick, Bella Josiane, Foncha Felix, Emmanuel Mpondo Mpondo, Véronique Penlap Beng, Tavea Fréderic Marie

Journal of Environmental Protection Vol.12 No.7, July 9, 2021

DOI: 10.4236/jep.2021.127029 470 Downloads 1,855 Views Citations
Recent Technological Innovation for the New Generation of CRIST Sensors—A Practical Approach in China’s Largest Underground Nonferrous Mine (Articles)

Xiaoqiang Guan, Haibin Li, Zhiyong Tan, Xubin Wu, Wei Zhang

Open Journal of Applied Sciences Vol.13 No.8, August 25, 2023

DOI: 10.4236/ojapps.2023.138107 227 Downloads 1,128 Views Citations
Modelling of the High-Energy Ball Milling Process (Articles)

Mohsen Mhadhbi

Advances in Materials Physics and Chemistry Vol.11 No.1, January 29, 2021

DOI: 10.4236/ampc.2021.111004 3,082 Downloads 8,501 Views Citations
Thorn-Shape Waveform and Double-Strike Phenomenon Seen in the Impact Force of Soft Materials (Articles)

Yukio Fujimoto, Chen Liu, Yoshikazu Tanaka, Eiji Shintaku, Toshiki Nakanishi

World Journal of Mechanics Vol.5 No.4, April 23, 2015

DOI: 10.4236/wjm.2015.54007 3,861 Downloads 4,917 Views Citations
Blood Stain with Hammer Imprint Shown in Crime Scene (Articles)

Samir Kumar Bandyopadhyay, Nabanita Basu

Open Access Library Journal Vol.2 No.4, April 24, 2015

DOI: 10.4236/oalib.1101412 2,758 Downloads 4,690 Views Citations
Removal of Organic Matter from Paper Mill Effluent by Electrochemical Oxidation (Articles)

Teresa Zayas, Mario Picazo, Leonardo Salgado

Journal of Water Resource and Protection Vol.3 No.1, January 29, 2011

DOI: 10.4236/jwarp.2011.31004 8,636 Downloads 16,094 Views Citations
Assessment of microbial pools by an innovative microbiological technique during the co-composting of olive mill by-products (Articles)

Teresa Casacchia, Pietro Toscano, Adriano Sofo, Enzo Perri

Agricultural Sciences Vol.2 No.2, May 20, 2011

DOI: 10.4236/as.2011.22015 6,172 Downloads 11,186 Views Citations
Development of Roller Ends Forced-Contact Model and Cambering Technology for UCM Temper Mill (I)——Development of Roller Ends Forced-Contact Model and the Computational Model of Flatness for UCM temper mill (Articles)

Zhenhua Bai, Hongxin Si, Xiaodong Shi, Linfang Han, Ruibing Long, Shoumin Wu, Xiujun Li, Dongdong Zhang

Engineering Vol.3 No.7, July 20, 2011

DOI: 10.4236/eng.2011.37088 4,806 Downloads 7,872 Views Citations
Development of Roller Ends Forced-Contact Model and Cambering Technology for UCM Temper Mill (II)——Development of cambering technology for UCM temper mill (Articles)

Zhenhua Bai, Xiaodong Shi, Hongxin Si, Linfang Han, Ruibing Long, Shoumin Wu, Xiujun Li, Dongdong Zhang

Engineering Vol.3 No.7, July 22, 2011

DOI: 10.4236/eng.2011.37089 4,590 Downloads 7,727 Views Citations

First <12 3 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies