3D Printing Bone Scaffold - Articles - Scientific Research Publishing

3D Bio-Printed Bone Scaffolds Incorporated with Natural Antibacterial Compounds (Articles)

Zhuo Zhang, Yiqi Yang, Hongbo Zhang, Shengbing Yang, Ruixue Yin, Wenjun Zhang

Journal of Materials Science and Chemical Engineering Vol.10 No.3, March 30, 2022

DOI: 10.4236/msce.2022.103005 423 Downloads 1,443 Views Citations
3D Printed Scaffolds as a New Perspective for Bone Tissue Regeneration: Literature Review (Review)

Raquel Couto de Azevedo Gonçalves Mota, Emerson Oliveira da Silva, Felipe Fortes de Lima, Lívia Rodrigues de Menezes, Antonio Carlos Santos Thiele

Materials Sciences and Applications Vol.7 No.8, August 31, 2016

DOI: 10.4236/msa.2016.78039 4,520 Downloads 11,498 Views Citations
Possibilities in 3D Printing by Radiosurgical Operations (Articles)

M. Šramka, E. Ružický

Journal of Biosciences and Medicines Vol.4 No.12, December 1, 2016

DOI: 10.4236/jbm.2016.412003 1,864 Downloads 3,627 Views Citations
Effects of laminin on hard tissue formation by bone marrow cells in vivo and in vitro (Articles)

Masataka Yoshikawa, Hideyuki Kakigi, Takayoshi Yabuuchi, Hiroyuki Hayashi

Journal of Biomedical Science and Engineering Vol.7 No.1, January 24, 2014

DOI: 10.4236/jbise.2014.71003 4,515 Downloads 6,790 Views Citations
Integrating Biodegradable 3-Dimensional-Printing into Tracheal Reconstruction (Articles)

Todd A. Goldstein, Lee P. Smith, Benjamin D. Smith, Daniel A. Grande, David Zeltsman

Open Journal of Regenerative Medicine Vol.4 No.3, September 15, 2015

DOI: 10.4236/ojrm.2015.43004 4,255 Downloads 5,926 Views Citations
Hybrid Scaffolds Composed of Amino-Acid Coated Sponge and Hydroxyapatite for Hard Tissue Formation by Bone Marrow Cells (Articles)

Takayoshi Yabuuchi, Masataka Yoshikawa, Hideyuki Kakigi, Hiroyuki Hayashi

Journal of Biomedical Science and Engineering Vol.7 No.6, May 13, 2014

DOI: 10.4236/jbise.2014.76034 3,967 Downloads 6,079 Views Citations
Experimental 3D Printed 4-Port Ventilator Manifold for Potential Use in Disaster Surges (Articles)

Richard Siderits, Gregory Neyman

Open Journal of Emergency Medicine Vol.2 No.3, August 27, 2014

DOI: 10.4236/ojem.2014.23008 5,070 Downloads 7,639 Views Citations
Computer Science Tools for Manual Editing of Computed Tomographic Images: Impact on the Quality of 3D Printed Models (Articles)

Jean H. D. Fasel, Jörg Beinemann, Karl Schaller, Heinz-Otto Peitgen

Surgical Science Vol.5 No.10, October 22, 2014

DOI: 10.4236/ss.2014.510068 3,213 Downloads 4,456 Views Citations
Application and Development of 3D Printing in Medical Field (Articles)

Sun Chunhua, Shang Guangqing

Modern Mechanical Engineering Vol.10 No.3, August 10, 2020

DOI: 10.4236/mme.2020.103003 2,147 Downloads 10,091 Views Citations
A Novel in Vitro Three-Dimensional Macroporous Scaffolds from Bacterial Cellulose for Culture of Breast Cancer Cells (Articles)

Guangyao Xiong, Honglin Luo, Feng Gu, Jing Zhang, Da Hu, Yizao Wan

Journal of Biomaterials and Nanobiotechnology Vol.4 No.4, September 11, 2013

DOI: 10.4236/jbnb.2013.44040 4,877 Downloads 8,264 Views Citations
Dextran coating on and among fibers of polymer sponge scaffold for osteogenesis by bone marrow cells in vivo (Articles)

Masataka Yoshikawa, Norimasa Tsuji, Hideyuki Kakigi, Takayoshi Yabuuchi, Yasunori Shimomura, Hiroyuki Hayashi, Hajime Ohgushi

Journal of Biomedical Science and Engineering Vol.3 No.8, August 23, 2010

DOI: 10.4236/jbise.2010.38100 4,897 Downloads 9,577 Views Citations
Development of an Experimental Phosphate-Calcium Cement with a Whisker-Like Structure (Articles)

Hideaki Narusawa, Yukimichi Tamaki, Takashi Miyazaki

Materials Sciences and Applications Vol.3 No.11, November 27, 2012

DOI: 10.4236/msa.2012.311111 4,879 Downloads 7,274 Views Citations
Repair of critical size rat calvarial defects using endometrial-derived stem cells embedded within gelatin/apatite nanocomposite scaffold (Articles)

Jafar Ai, Saeed Heidari-Keshel, Mahmoud Azami, Armin Ai, Naghmeh Bahrami, Abodoreza Mohamadnia

Stem Cell Discovery Vol.3 No.1, January 11, 2013

DOI: 10.4236/scd.2013.31006 4,695 Downloads 8,068 Views Citations
Synthetic Three-Dimensional Scaffold for Application in the Regeneration of Bone Tissue (Articles)

Dante Jesus Coletta, Liliana Raquel Missana, Talita Martins, Maria Victoria Jammal, Luciano Andrés García, Nayla Farez, Tomas De Glee, João Paulo Mardegan Issa, Sara Feldman

Journal of Biomaterials and Nanobiotechnology Vol.9 No.4, September 11, 2018

DOI: 10.4236/jbnb.2018.94016 1,399 Downloads 3,420 Views Citations
Applications and Research Progress of Multifunctional Hydrogels in Periodontal Tissue Regeneration (Articles)

Ying Wen, Siyun Zhang, Wu Zhang

Journal of Biosciences and Medicines Vol.13 No.2, February 13, 2025

DOI: 10.4236/jbm.2025.132009 110 Downloads 932 Views Citations
Application of Customized Navigated Template for Percutaneous Radiofrequency Thermocoagulation Treatment of Primary Trigeminal Neuralgia (Articles)

Peng Wang, Tiebao Gu, Zefeng Zhang, Huiqun Wu, Dafeng Ji

Chinese Medicine Vol.6 No.3, September 24, 2015

DOI: 10.4236/cm.2015.63019 4,285 Downloads 5,371 Views Citations
Enlarged and Colored Enhanced 3D Printing of Renal Artery Aneurysms for Improved Imaging and Treatment Planning (Articles)

Aaron Hoffman, Samy Nitecki, Tony Karram, Maxim Leiderman, Igor Kogan, Guennady Yudkovsky, Amos Ofer

World Journal of Cardiovascular Diseases Vol.6 No.1, January 19, 2016

DOI: 10.4236/wjcd.2016.61001 4,784 Downloads 6,547 Views Citations
Influence of Bed Temperature on Heat Shrinkage Shape Error in FDM Additive Manufacturing of the ABS-Engineering Plastic (Articles)

Young-Hyu Choi, Cheol-Min Kim, Hwan-Seock Jeong, Jeong-Ho Youn

World Journal of Engineering and Technology Vol.4 No.3D, October 20, 2016

DOI: 10.4236/wjet.2016.43D022 3,220 Downloads 8,026 Views Citations
The Barrier Properties of Flake-Filled Composites with Precise Control of Flake Orientation (Articles)

A. Tsiantis, T. D. Papathanasiou

Materials Sciences and Applications Vol.8 No.3, March 9, 2017

DOI: 10.4236/msa.2017.83016 1,573 Downloads 2,978 Views Citations
This article belongs to the Special Issue on Additive Manufacturing Materials
Design Consideration for Additive Manufacturing: Fused Deposition Modelling (Articles)

Ala’aldin Alafaghani, Ala Qattawi, Muhammad Ali Ablat

Open Journal of Applied Sciences Vol.7 No.6, June 29, 2017

DOI: 10.4236/ojapps.2017.76024 4,243 Downloads 11,710 Views Citations

First <12 3 ...>Last

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies